Speed of PC

ben91teg

New member
Joined
May 19, 2006
Messages
6
Reaction score
0
What is a good speed to apply polish and glazes? I start slow like 1500 and speed up around 4 or so. Is that the correct way to do it?
 
Generally I'd say 1 to 3 for glazes and 4 to 6 for polishes. Depends on what your goal for that polish is.
 
Mike T said:
Generally I'd say 1 to 3 for glazes and 4 to 6 for polishes. Depends on what your goal for that polish is.


What would you say as far as O.P.S..... Orbits Per Second that number 1 would be??

number 3??

number 4??

number 6??

My guess 1=1500
2=2600
3=3500
4=4500
5=5500
6=7000 I KNOW WHO CARES......:-)
 
highest speed 5.5-6 on PC for any polishing
3 on dial for glazes
1200-1800 max on rotaries polishing
 
Does anyone else notice that the PC doesn't increase speed from about 5 to 5.9, they when you hit 6 it hits a whole new speed? Almost doubles when I put in on 6.
 
Back
Top