What type of gun needed for foam gun?

P

prr

New member
Joined
Jul 11, 2015
Messages
125
Reaction score
0
I have recently started washing with my sponge and soap, all the windows in my cars, and this last weekend I started noticing light, straight scratches on one of the windshields. If my suspicions are correct--that it is caused by my sponge scraping dirt across them---I'm getting kind of frustrated. I have a grit guard, and scrape the chantel sponge six times (three on each side) before taking the sponge up out of the soap water.

Anyways, now I'm thinking I need to be using a foam gun/cannon whatever. First off--do I have to get a dedicated product, or can I just use the type of thing I have, to kill weeds, that I hook my garden hose up to? Sorry if this is a stupid question, but I'd like to save a few bucks if I can. I would be using it with Meguiars Gold Class Shampoo, if that matters.

I did see Mike Philipps' article https://www.autogeekonline.net/forum/how-articles/102740-how-use-foam-gun-mike-phillips.html that I'll read later on.
 
prr said:
or can I just use the type of thing I have, to kill weeds, that I hook my garden hose up to?
Click to expand...

no, it's not the same. not all soaps are created equal in the foam gun and IMO megs gold class works best in the bucket wash...

if you are only going to use the foam gun as a pre-soak only (which many do), then get a pressure washer instead (a small electric can be bought for around $100). it's a waste to only use it for that purpose. buy a few of the megs microfiber wash mitts, they are inexpensive and lasts a good while...
 
prr said:
I have recently started washing with my sponge and soap, all the windows in my cars, and this last weekend I started noticing light, straight scratches on one of the windshields. If my suspicions are correct--that it is caused by my sponge scraping dirt across them---I'm getting kind of frustrated. I have a grit guard, and scrape the chantel sponge six times (three on each side) before taking the sponge up out of the soap water.

Anyways, now I'm thinking I need to be using a foam gun/cannon whatever. First off--do I have to get a dedicated product, or can I just use the type of thing I have, to kill weeds, that I hook my garden hose up to? Sorry if this is a stupid question, but I'd like to save a few bucks if I can. I would be using it with Meguiars Gold Class Shampoo, if that matters.

I did see Mike Philipps' article https://www.autogeekonline.net/forum/how-articles/102740-how-use-foam-gun-mike-phillips.html that I'll read later on.
Click to expand...

Sponges are not a good idea to wash a car. Get yourself 2 microfiber wash mits. One for the paint and glass and one for the wheels. Never use the one for wheels to touch the paint and glass, brake dust can get suck in the fibers and scratch the car.

As for the foam gun, the best thing you could do would be to buy a pressure washer. It's the safest way to remove the heavy dirt from the car. Once you have that, many come with a foam cannon. If not you can purchase one for it. The type of soap you use in the foam cannon makes little difference. Some are a little bit better than others but overall the idea of doing a foam bath is what matters more. If you want to use Gold Class in the foam cannon, it will work well. If you prefer to use a dedicated product, I would suggest something like Chemical Guys Honeydew which is designed for foam cannons.
 
I've used Megs Gold Class in my foam gun......and it worked okay, but not great. I've had better luck with Griots Brilliant Shine.....available here and locally at Advance Auto Parts and Pep Boys...catch it on sale and it's about the same price as the Meguiars Gold Class
 
this is a foam gun where you attach it to your garden hose...
autogeek-quart-foamaster-foam-gun-free-bonus-10.gif


and this is a foam cannon/lance that is used with a pressure washer...
autogeek_2267_60041565
 
Calendyr said:
Sponges are not a good idea to wash a car. Get yourself 2 microfiber wash mits. One for the paint and glass and one for the wheels. Never use the one for wheels to touch the paint and glass, brake dust can get suck in the fibers and scratch the car.

As for the foam gun, the best thing you could do would be to buy a pressure washer. It's the safest way to remove the heavy dirt from the car. Once you have that, many come with a foam cannon. If not you can purchase one for it. The type of soap you use in the foam cannon makes little difference. Some are a little bit better than others but overall the idea of doing a foam bath is what matters more. If you want to use Gold Class in the foam cannon, it will work well. If you prefer to use a dedicated product, I would suggest something like Chemical Guys Honeydew which is designed for foam cannons.
Click to expand...


That's not been my experience. I've caused more marring with microfiber than foam. Not that either is the main cause of wash marring from my experience. Low moister content when moving the sponge or microfiber over the paint (waterless/detail sprays) and picking items up from the lowest parts of the body parts both far exceed the damage caused by either 'tool' itself.
 
ducksfan said:


That's not been my experience. I've caused more marring with microfiber than foam. Not that either is the main cause of wash marring from my experience. Low moister content when moving the sponge or microfiber over the paint (waterless/detail sprays) and picking items up from the lowest parts of the body parts both far exceed the damage caused by either 'tool' itself.
Click to expand...

You are using a sponge or microfiber mit with waterless and detail spray? Ouch.

First off, waterless wash should only be used if the car is almost clean. If it is very dirty, no matter what you do, you will damage the paint. Second, you should be using a microfiber tower with that product. There is not enough product to saturate the mit or sponge, and you will have very limited lubricity with either. Using a wet microfiber towel with very light pressure and lifting the dirt as you swipe the panel is the safest way to use these products.

Finally the lower part of the panel should always be done last since it is the dirtiest part of the panel most of the time.

I have never liked Waterless and do no use it. If you can't use free flowing water, I strongly suggest you switch to rinseless and use the Garry Dean method of having 6-10 microfiber towels in your solution bucket, spraying the panel with a spray bottle or garden sprayer with solution then discard each towel as it becomes dirty and never re-introduce it in your cleaning solution. There is no safer way of cleaning if you can't use free flowing water. Otherwise, a pressure washer is the best tool you can use. Removing all the heavy dirt before touching the panel will make it very difficult to scratch the panel while washing. Especially if you did a foam coat as well.
 
Thanks, that explains it clearly. I can handle the garden hose unit.

I do have one question---the foam gun that is attached to the garden hose, that are half the price--if you have any experience with them, are these cheaper units less durable, or do they break rather quickly? In the event that I get one, I'd hate to blow 70 bucks on a unit that will only last a year or so....


VISITOR said:
this is a foam gun where you attach it to your garden hose...


and this is a foam cannon/lance that is used with a pressure washer...
Click to expand...
 
prr said:
Thanks, that explains it clearly. I can handle the garden hose unit.

I do have one question---the foam gun that is attached to the garden hose, that are half the price--if you have any experience with them, are these cheaper units less durable, or do they break rather quickly? In the event that I get one, I'd hate to blow 70 bucks on a unit that will only last a year or so....
Click to expand...

the foam gun is very durable and i have had mine for over 8+ years with no problems. from the beginning i've always filled the canister/bottle on both the foam gun and cannon and run clean water through them when i'm finished though it's not necessary. there are several different foam guns but the tried and true is like the one above with the brass sliding pin, where some have a plastic dial which i don't care for. while not for everyone, i really like my foam gun and don't regret having it. i have the butcher's foam gun below which is made by gilmour and is exactly like the one above...
41nTs5Kj4cL._SL210_.jpg
 
I have the foam gun pictured in post #6 of this thread. It is a purchase I've never regretted.
 
Hmmm i just washed the van again, and looked out the windshield from the inside this time. I think what I thought were scratches, was just some gunk on the inside of the windshield---much easier to remove! But if I do want to stop using a sponge or mitt, I'll go with the foam gun.

Some interesting comments here, as always.
 
Gold class does fine in a foam gun. I use it regularly. Just add a little more and set the gun wide open.
 
Calendyr said:
You are using a sponge or microfiber mit with waterless and detail spray? Ouch.

First off, waterless wash should only be used if the car is almost clean. If it is very dirty, no matter what you do, you will damage the paint. Second, you should be using a microfiber tower with that product. There is not enough product to saturate the mit or sponge, and you will have very limited lubricity with either. Using a wet microfiber towel with very light pressure and lifting the dirt as you swipe the panel is the safest way to use these products.

Finally the lower part of the panel should always be done last since it is the dirtiest part of the panel most of the time.

I have never liked Waterless and do no use it. If you can't use free flowing water, I strongly suggest you switch to rinseless and use the Garry Dean method of having 6-10 microfiber towels in your solution bucket, spraying the panel with a spray bottle or garden sprayer with solution then discard each towel as it becomes dirty and never re-introduce it in your cleaning solution. There is no safer way of cleaning if you can't use free flowing water. Otherwise, a pressure washer is the best tool you can use. Removing all the heavy dirt before touching the panel will make it very difficult to scratch the panel while washing. Especially if you did a foam coat as well.
Click to expand...

I received an email that there had been updates to this thread. I read your reply and thought that guy is inferring thoughts into my post that I didn't write. I was just about to post back when I reread my post to reference from.
Guess what, I did post that I use sponges and mitts with waterless/ detail spray. Well, I don't do that. Like you, I rarely ever use either of those systems (too high of a scratch risk).
Anyhow, I do use a sponge (typically the Optimum blue one to do rinseless). My experience is that it is safer than a microfiber mitt.
 
You must log in or register to reply here.
Back
Top