Why is it so hard to dry my car?

StuDLei

StuDLei

New member
Joined
May 28, 2012
Messages
330
Reaction score
0
No matter the towel I use, I cannot slide a towel over the car to dry. If I do, it's requires too much pressure in order to do so, at least in my opinion.

My car is clayed often, so that's not the issue.

Now, it will be slick for the first wash (maybe two washes) after a wax, but then it's back to normal.

I currently use HD Guzzlers and pat dry, but it's a pain.

Are some cars just notorious for this or what?

I have a black 2004 350z.
 
Clay removes wax, or most of it. Also wax won't last long. You can try a spray wax to help drying, spray wet surface and water will roll off in theory. Also spray wax as topper after each wash to extend your original wax.

Other choice, blowers. And sealants which last longer, or hydrophobic coatings.
 
I've noticed that the temperature seems to have a lot to do with it. If it is cold the water seems to stick much more than when it is warm. When it is warm most of water can be driven off with the hose, but when it gets cold it takes a lot more drying with the towel. I am using a detail spray to help, but it doesn't completely overcome the cold.
 
Try drying with a quick detail spray, waterless wash, or spray wax. That's what I do. Adds a bit of shine as a bonus, and lubricates. Another thing? Though it sounds counter-intuitive, don't use a dry towel. Soak the drying towel, then wring it out as best you can, and spray and dry each panel with a quick detail spray. Safest method my noobie self knows to dry a panel. I then go over each panel with a dry buffing towel to buff away QD/spray wax to a nice shine.
 
Romans5.8 said:
Try drying with a quick detail spray, waterless wash, or spray wax. That's what I do. Adds a bit of shine as a bonus, and lubricates. Another thing? Though it sounds counter-intuitive, don't use a dry towel. Soak the drying towel, then wring it out as best you can, and spray and dry each panel with a quick detail spray. Safest method my noobie self knows to dry a panel. I then go over each panel with a dry buffing towel to buff away QD/spray wax to a nice shine.
Click to expand...

Does it make sense to use quick detail and then go through with a wax? Or might as well use the wax for drying?
 
CrashnBrn said:
Does it make sense to use quick detail and then go through with a wax? Or might as well use the wax for drying?
Click to expand...

I would just try both and see what works best for you. It's been my experience that what works for one person doesn't work at all for another. Personally, I prefer a QD spray or waterless wash w/ carnauba over a spray-wax for drying. Important to note that spray wax (or a QD/WW with wax) shouldn't be considered a replacement for a traditional sealant or wax applied regularly. Wax wears away quickly and sometimes unpredictably. Personally, I don't treat my wax as a protective layer (even though it is), just cosmetic. I rely on sealants, applied by machine, to protect my paint. Then I top with wax purely for the look of it. That includes spray wax and things.
 
You didn't mention which "wax" you like to apply. I have been using BLACKFIRE Black Ice. It seems to sheet water very efficiently! It is also holding up very well this winter. After a weekly wash I use a "sheeting" rinse followed by a leaf blower. I only pull the Guzzler out for what ever drips out of the side mirrors.
 
Without the Master Blaster and DI water I can't dry a car to save my life when it's cold. Water drips out of seams, behind mirrors, and out of cracks forever. Maybe look into getting some type of air drying tool.
 
Man, I should have put a little more info into that first post!


I ONR my car and that is IT (so no sheeting method). Here in NE in the winter it gets washed maybe once every 4-6 weeks (just depends on the weather). In the summer I wash it multiple times per week.

Since the car does does get super dirty here, I will rinse it off first, but it does little because the water pressure is pretty poor. I plan to polish my car with SF4500 twice a year anyways, so I'm just careful ONRing a super dirty car.

Anyways, even if I use a sealant (Optimum) I still have the same problem, no matter if summer or winter. The slickness just does not last long at all. I've tried drying with Optimum Spray Wax, but get the same results. I suppose if I waxed the car every time or two I washed I could keep that same super slickness, but that's more than I really wanted to do. Maybe I'll change my opinion.

Come summer I'd like to try Ultima's sealant as I hear it's super slick, just not sure how long that slickness will last.

I'd also like to try ONRWW and see how that goes.
 
How much are these spotless water systems you guys have? They're very expensive, right?
 
If you keep a sealant on it it should dry really easy I'm not a fan of wax really anymore. Most them do not have great durability and I only wax show cars and garage queens.
 
Pureshine said:
If you keep a sealant on it it should dry really easy I'm not a fan of wax really anymore. Most them do not have great durability and I only wax show cars and garage queens.
Click to expand...


Except collinite! Which I don't consider a wax.


I think the OP needs to get a leaf blower and spray wax/QD.
 
KillaCam said:
Except collinite! Which I don't consider a wax.


I think the OP needs to get a leaf blower and spray wax/QD.
Click to expand...

I ONR, so a leaf blower won't help. And I already have spray waxes and QD.
 
My drying process is as follows: I sheet water over the car, this leaves the car 90% dry on a well maintained protected finish by itself. I then spray quick detailer (XMT Final Finish quick detailer because its decent and cheap) and use a waffle weave microfiber drying towel and wipe the car. I end up with a spot free shiny and slick finish. The QD adds a little lubrication to help prevent swirls and scratches.
 
What time of day are you washing then trying to dry your car?

I know when I wash my car in the evening and the sun sets I then start fighting the dew that settles on the car. No matter how much I dry and dry it doesn't matter because I can't beat science or mother nature. Fortunately I can pull into my garage and win.
 
I wash my towels after I use them with all my other microfiber products and then dry them on low in my drier.
 
I've always found ONR difficult to dry no matter the condition of the weather, LSP, nor dilution of the rinseless solution. I picked up a bottle of UWW+ and while it's more expensive for rinseless washes, and performs no better or less than ONR, I just found it easier to dry in general and streak-free.

I've also heard mixed reviews regarding Opti-Seal and it's slickness, I haven't tried it myself, but I've never heard a doubt about the slickness of BFWD or WGDGPS and having used both, I can say it's the slickest of any LSP I've used (various Meg's, Dodo, CG). Although the Dodo has been the best for sheeting IME. All that being said, you may want to consider a topper to the Opti-Seal or another sealant/LSP altogether.
 
You must log in or register to reply here.
Back
Top