Recommendations for Optimum Power Clean interior dilution ratios?

R

randomevent

New member
Joined
Dec 25, 2013
Messages
65
Reaction score
0
I'm hoping I can field some opinions on using Optimum Power Clean for interior work. Currently, I use OPC undiluted for pad cleaning, or at 3:1 for really nasty tires.

I've been wanting to use it for the interior, but for some reason I feel as if 3:1 seems to strong. I was hoping someone would be able to chime in on the dilutions they've found work best with OPC.

Specifically, I'm wondering about leather, plastics, and the dash. I've read that you can go as low as 8:1, but I'd like to hear some opinions about those who have more experience with OPC than I do.

Thanks.
 
I, too, use 1:10 on interior cleaning. If it is really bad, and the 1:10 isn't touching it, then I have bumped up to 1:3, but only in spot instances. There were no ill effects and I wouldn't have a problem doing it again, if needed.
 
I've now made a bottle of 3:1 and 10:1. I was lucky enough to have just enough OPC to cover both of those.

I'll have to add some on to my next order.
 
I have used it 3/1 on leather without issue. Not the best pics, but the left side is 3/1, right side has not been cleaned......3/1 is probably overkill though.

View attachment 25267
 
10:1 for me, works 95% of the time perfectly. For more power I use 5:1 or increase the dwell time for the 10:1 solution
 
You must log in or register to reply here.
Back
Top