how do I remove Rain-X residue on windshield?
- Thread starter sito
- Start date
FUNX650
New member
- Dec 1, 2010
- 21,057
- 0
The most sure fire (no pun intended) way to completely remove RainX is to use naptha. Regular Zippo-type lighter fluid is naptha based. So is Coleman (or similar) camp fuel. You can also use VM&P naptha...found at most home improvement and paint supplies stores.
Naptha eliminates any RainX that has even found its way into auto glass' microscopic 'pores'.
Bob
Naptha eliminates any RainX that has even found its way into auto glass' microscopic 'pores'.
Bob
- Thread starter
- #4
have you used naptha before? this stuff is volatile.
allenk4
In time out
- Mar 12, 2013
- 4,845
- 0
You can use 0000 to clean your windshield...but, why?
What are you trying to remove?
What products and techniques have you tried so far?
FUNX650
New member
- Dec 1, 2010
- 21,057
- 0
•Yes: Of course I have used naphtha, and products containing naphtha many, many times before.
-I would not have otherwise suggested its use, in order to remove RainX residues, if I had not.
•I also know full-well of its volatility. Accordingly:
-I use extraordinary safety pre-cautions when I do use naphtha.
•Naphtha will, as I said earlier, completely remove the RainX- residues. But:
-If you have feelings of uneasiness in using Naphtha for this project...then don't!
I sure would not!!
I do not want any of the steel-wools' broken-off, excess metal shards anywhere near my vehicle that will only rust; or: be faced with potential windshield scratches, from its use.
Bob
- Thread starter
- #9
this is old Rain X application. It lost its potency.
- Thread starter
- #10
I saw youtube video that suggested using steel wool.
Johnnyboy
New member
- Oct 15, 2010
- 201
- 0
:whs:
For fresh applications.......I used to have a hard time buffing it off myself. I now use Rain-X after I wash and before drying the whole vehicle. I only dry the windows, apply the product according to directions and then buff off what I can. After that, I rewash the windows and that gets the residue all off.......then dry the whole car. I get NO residue and no excess of dirt build up this way. With old applications.....never had to remove any myself as I have never had a problem with it. GL
FUNX650
New member
- Dec 1, 2010
- 21,057
- 0
•RainX' MSDS:
http://bigcatrescue.org/wp-content/uploads/2014/04/Rain-X.pdf
-It contains plenty of "flammables" {
}...
yet you were willing to use it on your windshield.
•OK...Let's go this route:
-How about a detailing-product that has "naphthenic hydrocarbon distillates" (OH so many, many do).
-Meguiar's #04 fits the bill, IMO.
•Use #04 on a terry-cloth towel/pad, to hopefully rub-off the RainX-residues.
-Note: As Mike Phillips has stated on occasion:
You may have to put some passion behind the pad/(terry-towel).
Bob
http://bigcatrescue.org/wp-content/uploads/2014/04/Rain-X.pdf
-It contains plenty of "flammables" {
}...yet you were willing to use it on your windshield.
•OK...Let's go this route:
-How about a detailing-product that has "naphthenic hydrocarbon distillates" (OH so many, many do).
-Meguiar's #04 fits the bill, IMO.
•Use #04 on a terry-cloth towel/pad, to hopefully rub-off the RainX-residues.
-Note: As Mike Phillips has stated on occasion:
You may have to put some passion behind the pad/(terry-towel).
Bob
allenk4
In time out
- Mar 12, 2013
- 4,845
- 0
I used Rain-X for years and never had issues applying a fresh coat on a windshield that had Rain-X on it previously.
I wonder if you are not getting the windshield completely clean prior to application of Rain-X?
There are several threads on AGO centered around proper cleaning of glass. I suggest:
- Your Regular Wash
- Clay the Glass
- Clean exterior with Glass Cleaner
- Apply Rain-X
I would use 0000 as a very last resort. Scratches in glass are very difficult to remove.
I wonder if you are not getting the windshield completely clean prior to application of Rain-X?
There are several threads on AGO centered around proper cleaning of glass. I suggest:
- Your Regular Wash
- Clay the Glass
- Clean exterior with Glass Cleaner
- Apply Rain-X
I would use 0000 as a very last resort. Scratches in glass are very difficult to remove.
TheFrankenberry
New member
- Mar 22, 2013
- 93
- 0
Don't use 0000 steel wool. Yes, it will work, but with a ton of elbow grease on your part. Why not just polish it out as Mike as shown in several of his videos?
In any case, it's just Rain-X. Just spray it for half an hour with a hose and it'll disappear...
In any case, it's just Rain-X. Just spray it for half an hour with a hose and it'll disappear...
- Thread starter
- #18
where do I find this Bon Ami?
Check the 'household cleaner' area (like where the stuff for cleaning pot and pans lives) in your grocery store, also many hardware stores carry it.
Bill
- Thread starter
- #20
are you sure about this stuff? I tried steel wool without success.