CG V34 vs Meg's Ult Compound-anyone use both?

Daviddear30

Daviddear30

Well-known member
Joined
May 7, 2011
Messages
1,424
Reaction score
203
Has anyone used both of these? Trying to see which has more cut. Working on some corvette hard clear :-)
 
FWIW, you may not even need something that aggressive. i would suggest getting two polishes, a heavy one and finishing one. Combined with the right pad, you may just need a light polish.

as always do a test spot. good luck
 
I bought a large bottle of the V34 and the bottle is still close to full.
I find the Ultimate Compound cuts mich faster.
The V34 is easy to work with but it won't remove heavy defects as of the UC.

IMO the UC is better over all.

cajundetailingbykevin.com

Sent from my SAMSUNG-SGH-I747 using AG Online
 
I've used UC and like it. My 02 Camaro SS has hard clear and UC didn't do much to get the swirls out on certain areas. M105 didn't get them out either. I actually went to D300 + megs MF cutting pads. That worked like a charm. Try UC first.
 
JohnsHandWash&Wax said:
^^^ Ehhh.. Ive had great experience with V34 and orange pads. It`s good stuff. Their V32 is good too.
Click to expand...

I'd concur with the other poster. We used the V-line at a place I worked at. They're good, but unremarkable. I'd go with a Menzerna product every time.

I also had similar experience with their other correction line (the 700 series). I found the polishes to be good but the compound left a lot to be desired.
 
You must log in or register to reply here.
Back
Top