2nd Coat Cquartz UK

B

BlackRam

New member
Joined
Nov 11, 2013
Messages
282
Reaction score
0
Alot of people do 2 coats of cquartz uk.
This past weekend I had the liberty of storing my truck in the garage all weekend after application.

If I want to apply a second coat this weekend, but do not have the liberty of a garage, is that ok? there is alot of polleen where I live too.

I A- want the extra durability B- extra gloss C- make sure I didn't miss any spots. I only used 25 ML out of 50 ML on my Ram 1500 Crew

thanks guys (as always for your guidance)
 
A 2nd coat is typically applied 1-2 hours after the initial coating. I personally would not attempt to apply a 2nd coating a week after the initial coating. Chances are the first coat has already cured to the point where the 2nd layer would not properly bond to the surface.
 
well i among others take your advice to a T
then let me ask you this, there are a few hazy spots,
can i apply some simple green to bring down?
do i need to recoat on those areas?
 
BlackRam said:
thanks bob, i actually read this thread twice, i am confused-
do i apc then reapply in those spots or add reload?

it seems like there are 2 different though processes?

and can it wait until saturday or does it need to be done sooner?

(coating was done fri the 9th)
Click to expand...
I'd try my best to follow Avi's below advice/suggestions,
from the above "haze thread":
Avi@CarPro said:
to remove the hazed areas you can use APC on these ,

even our new Reset shampoo can be good for it in high concentration,

once removed i would suggest to coat again on these areas.
Click to expand...

Bob
 
thank you sir, can i wait til the weekend?
it is supposed to rain tomorrow and randomly throughout the week but the weekend is supposed to be nice
 
You must log in or register to reply here.
Back
Top