Menzerna FG400 vs Wolfgang TSR 3.0

[Paulyfe12]

Heard great things about both of them and apparently they share a lot of the same technology and formulas. So I'm curious as you which do you guys think is better in terms of paint correcting ability, ease of use, correcting speed, how glossy it finishes, how long the use time is, etc.

 

[281]

FG400 = Wolfgang Über, TSR has less cutting ability. FG400 finishes awesome imo... It really all depends how much cut you need. FG400/SF4000 is great combo!

 

[Paulyfe12]

alright then, I have to wetsand a pretty bad gash out of the lower front bumper and I gotta correct the paint. So the Wolfgang correction combo could work and ill use the FG400 to remove the wetsanding marks

 

[custmsprty]

FG400 = Wolfgang Über, TSR has less cutting ability. FG400 finishes awesome imo... It really all depends how much cut you need. FG400/SF4000 is great combo!

:dblthumb2::iagree: A FREAKING MEN!

 

[281]

alright then, I have to wetsand a pretty bad gash out of the lower front bumper and I gotta correct the paint. So the Wolfgang correction combo could work and ill use the FG400 to remove the wetsanding marks

What machine/pads you using?

 

[Paulyfe12]

CCS Lake Country Orange and white pads. and im gonna get orange and white CCS euro Hand polishing pads for the area I need to compound after wetsanding and the hard to reach areas when I correct the whole car. Was gonna use WG TSR 3.0 followed by the WG Finishing Glaze. then seal it all in with either FK 1000P or WG Sealant. That's for the paint correction, I was gonna use The FG400 with a Euro hand pad to clean up and gloss the wetsanding spot on the bumper after I fix the gash.

 

[281]

CCS Lake Country Orange and white pads. and im gonna get orange and white CCS euro Hand polishing pads for the area I need to compound after wetsanding and the hard to reach areas when I correct the whole car. Was gonna use WG TSR 3.0 followed by the WG Finishing Glaze. then seal it all in with either FK 1000P or WG Sealant. That's for the paint correction, I was gonna use The FG400 with a Euro hand pad to clean up and gloss the wetsanding spot on the bumper after I fix the gash.

FG400 = WG Uber
PF2500 = WG TSR ?
SF4000 = WG Finishing Glaze

The WG products are made by Menzerna for AG.

WG Uber/WG Finishing Glaze is AWESOME too :dblthumb2:

Looks like you got your bases covered Pauly - be sure to share your results rops:

 

[spiralout462]

They say Wolfgang polishes are more user friendly than Menzerna. Wolfgang Uber has pretty much replaced WG TSR for me. I use them on LC Hydrotechs and can't imagine an easier, more effective combination!

 

[281]

They say Wolfgang polishes are more user friendly than Menzerna. Wolfgang Uber has pretty much replaced WG TSR for me. I use them on LC Hydrotechs and can't imagine an easier, more effective combination!

:iagree: