2012 Dodge Ram 2500 Black Paint Correction & Coated with PBL Paint Coating.

[Scott@IncrediblyDetailed]

Process:

• Dawn Wash.
• Nanoskin Clay Pad Decon.
• Iron-X.
• Compounded with FG400.
• Polished with SF4000.
• IPA Wash.
• Glass polished with Pinnacle Water Spot Remover.
• Trim and tires dressed with CG VRP dressing.
• Windows, wheels and paint coated with the PBL Coatings.
• Door jams cleaned with ONR and protected with Optimum Car Wax.

Before:

During:

After:

 

[RobertJ34]

Great job, Scott. Looks amazing, great job on that correction.

Also, what exactly is an "IPA wash"?

 

[Scott@IncrediblyDetailed]

Great job, Scott. Looks amazing, great job on that correction.

Also, what exactly is an "IPA wash"?

I do a Rinseless wash with IPA to remove any polishing oils before application of any coatings.

 

[RobertJ34]

fail. my bad! I missed the "dawn wash" before and was wondering if you mixed IPA with soap and washed haha.

thanks!

 

[Getting it done]

Nice job.

 

[sproketser]

Great job on the RAM mate !

 

[10secdream]

Great job Scott. Mind me asking how long this took on such a large vehicle?

 

[haris300]

Looks like new again. Nice job!

 

[jamesboyy]

Amazing work on that truck you saved it from it's waterspot/swirl horror

 

[Scott@IncrediblyDetailed]

Great job Scott. Mind me asking how long this took on such a large vehicle?

20-25 hours and it included a complete interior with steam cleaning, shampoo, etc.

It was a test of patience and will power for sure.

 

[Tato]

Incredibly detailed Scott, awesome job on paint correction. You have also beautiful pictures, your 50/50, 75/25 and 25/75 shots are amazing.

Thanks a lot for sharing,

Kind Regards.

 

[Just02896]

20-25 hours and it included a complete interior with steam cleaning, shampoo, etc.

It was a test of patience and will power for sure.

I have the same truck! Did you use MF or foam pads with the FG400?

 

[Mike@DedicatedPerfection]

Beautiful work on that behemoth of a truck! That black paint really looks good now. Nice pictures BTW.

I'm guessing you were using the larger 6.5 pads?

 

[Eric@CherryOnTop]

Great job as always Scott, were you able to fit that beast in the garage to work on it?


Sent from my iPad using Tapatalk

 

[LatinFG2]

Awesome work!

 

[Scott@IncrediblyDetailed]

Thanks for the kind words everyone!

I have the same truck! Did you use MF or foam pads with the FG400?

Foam, LC Flat Orange Pads. LC Flat White with SF4000.

Beautiful work on that behemoth of a truck! That black paint really looks good now. Nice pictures BTW.

I'm guessing you were using the larger 6.5 pads?

I used 6 or 6.5 inch pads, I honestly don't know their exact measurement. Lots was done with 3 and 4 inch pads on the Porter Cable. I have much better results when I match pad size to the panel I'm working on.

Great job as always Scott, were you able to fit that beast in the garage to work on it?


Sent from my iPad using Tapatalk

Yup fit in the garage no problem. I had about 2 feet on either end, and I have a wide two car garage.