Best polish for Carpro velvet pads

[R/TED]

Hi everyone, would like to know what is the best/ most user friendly polish to use with the velvet orange peel pads? Will be ordering these pads and would appreciate some info. Will be using these pads with the Flex 3401. Thanks.

 

[parttimer]

I believe FG400 was the pick for someone that did a test. Megs 105 cut better was much more messy. The FG400 finished out better with less dusting.

 

[allenk4]

In my opinion, finishing ability is not a big concern when removing OP

Nothing will finish down enough that you will not need an intermediate polish to remove the inevitable marring from the OP removal process

I tried FG400, M105, M100 with the Denim pads. M100 was the clear winner

On my Flex 3401 it was along process with the Denim. The velvet is less aggressive

Take lots of before and afters

 

[R/TED]

In my opinion, finishing ability is not a big concern when removing OP

Nothing will finish down enough that you will not need an intermediate polish to remove the inevitable marring from the OP removal process

I tried FG400, M105, M100 with the Denim pads. M100 was the clear winner

On my Flex 3401 it was along process with the Denim. The velvet is less aggressive

Take lots of before and afters

Thanks for the input. I have FG400, will order M100 and do one panel with with each and see what results i get. Will also order the denim pads and try those also. I like to try different products based on feedback here. Thanks again.

 

[allenk4]

Thanks for the input. I have FG400, will order M100 and do one panel with with each and see what results i get. Will also order the denim pads and try those also. I like to try different products based on feedback here. Thanks again.

If you car is curvy, you will want to be the 5.3" and the smaller pads