Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Does anyone have any experience with Aerospace 303 on tires? Thumbs up or down?
So I have not added any tire dressing for a few months now and have cleaned the tires the past 4 washes with two products so far:
1. Purple Power - 50/50 mix
2. Megs APC - full strength
I probably apply at least a minimum of 5 applications (plus scrubbing) per tire before the foam becomes mostly white. After the tires dry its dissapointing to still see a little brown on the sidewalls. Is spending a few hours on tires typical to get rid of this browning?? Or do I need to try something different on these new Yoko tires?
I'm trying to get them brown-free so I can apply TW Tire Coat!![]()
I've found that Megs D143 @2:1 is better at cleaning tires than D101 @ full strength.
Was really surprised by it.
Thanks for the suggestion on it :xyxthumbs:Yup. D143 is great and I agree with what you wrote.
I wonder about this as I recently cleaned a set of tires that had been in a warehouse since the 50's. They were NOS and never mounted. It took 4 to 5 times washing and scrubbing to get all the brown off.As far as tire protection and tire longevity goes...
I wonder if the "removal of browning" is ever a good thing to do to tires?
I'll say that the answer is: No...probably not
But if the brown (dis)coloration presents an unlivable-bugaboo; and the tire cleaners used so far has proven to be unsuccessful at its removal:
Put some Lacquer thinner on a disposable cloth and swipe the tire with it. POOF!!! Brown will be gone...gone until the tire's rotation brings some more of the tire's built-in protection to its surface, where it will have its turn: "to turn brown"
Note:
Until the above mentioned built-in protection comes to the tire's surface...a protective product needs to be applied to the tire. What product (tire dressing) are you planning to use?
Bob