dkmcclelland
New member
- Jan 6, 2013
- 19
- 0
Finally had a couple days off where I could break out the PC 7424 XP.
Step 1:
Used the Chemical Guys foam cannon and my electric pressure washer to get larger trash and sand off the car without marring the paint.
Step 2:
Washed the car with Dawn to strip any dealer wax
Step 3:
Dried and used my NanoSkin AutoScrub medium mitt
NanoSkin AutoScrub Medium Wash Mitt
Step 4:
There are no swirls or imperfections in the car so I used Menzerna SF 4500 fine polish to just give the Mineral Grey some depth.
Step 5:
IPA/Water 50/50 wipe down to remove any polishing oils
Step 6:
I Applied Blackfire Wet Diamond and let it sit for 30 minutes. Then after buffing off let it cure overnight
Step 7: Applied Blackfire Midnight Sun Carnuba Wax and followed up with Chemical Guys V7 spray detailer/sealant.
I want to add a cream glaze, but at this point I don't feel like it.
I didn't take any pictures in the process, but here's the final result. If you take a look back at another thread I started you'll see the back bumper that I had a fiasco with. I took it to a local highly recommended detailer and he wet sanded with 2000/3000 paper and compounded the bumper for me. There's almost no discernible difference now in the clear except for a couple of places that only my OCD eyes can see.
Pictures!!
Interior was dressed with 303 Aerospace protectant (LOVE this stuff!) Dressed/protected the leather with Leather Masters leather protecant
Step 1:
Used the Chemical Guys foam cannon and my electric pressure washer to get larger trash and sand off the car without marring the paint.

Step 2:
Washed the car with Dawn to strip any dealer wax
Step 3:
Dried and used my NanoSkin AutoScrub medium mitt
NanoSkin AutoScrub Medium Wash Mitt
Step 4:
There are no swirls or imperfections in the car so I used Menzerna SF 4500 fine polish to just give the Mineral Grey some depth.
Step 5:
IPA/Water 50/50 wipe down to remove any polishing oils
Step 6:
I Applied Blackfire Wet Diamond and let it sit for 30 minutes. Then after buffing off let it cure overnight
Step 7: Applied Blackfire Midnight Sun Carnuba Wax and followed up with Chemical Guys V7 spray detailer/sealant.
I want to add a cream glaze, but at this point I don't feel like it.
I didn't take any pictures in the process, but here's the final result. If you take a look back at another thread I started you'll see the back bumper that I had a fiasco with. I took it to a local highly recommended detailer and he wet sanded with 2000/3000 paper and compounded the bumper for me. There's almost no discernible difference now in the clear except for a couple of places that only my OCD eyes can see.
Pictures!!








Interior was dressed with 303 Aerospace protectant (LOVE this stuff!) Dressed/protected the leather with Leather Masters leather protecant
