Looking to purchase my 1st polisher

hosaltezza

hosaltezza

New member
Joined
Nov 9, 2015
Messages
19
Reaction score
0
I see all these great sales going on and am new to detailing. I am just going to detail my car and my wife car . I've been doing a lot off reading and still have a lot to learn . I am interested in getting a polisher and am thinking about getting the GG6. My question is do i get a GG6 and get a great deal now or just continue reading and learning some more and buy this in the near future? Thanks for your input.
 
I personally like the flex 3401 because of the forced rotation. If you are going to buy anything you might as well get it with a discount if you can.
 
I was also looking at that one I don't mind spending the money. I rather spend a little more if it's worth it . What would your recommend for a beginner starting kit ?
 
Go with the GG. It's better than the PC and perfect for what you will be doing.

I feel like the Flex suggested in above post will be too much for you and you can damage paint with Flex. Plus it's on the heavier side unlike the GG.
 
For just casual detailing the GG6 will be fine. If I were just doing it as a hobby I would buy the GG6 with a meguiars da microfiber kit. The 5" kit and then 4 of the meguiars or lake country thin foam cutting pads and 2 of the foam polishing pads. That's enough to do just about anything and then even if you wanted to do a little side work it's capable of that too. Then past that just a compound and a finish polish, I like menzerna or Wolfgang. You may not need much but just to have a complete setup and since you said you don't mind spending a little money I would just go about this far in. It would be a great idea to research. The sales are hot right now but autogeek always has something going for sales and if you call and talk with Nick maybe he can help you out when you are ready.
 
I will just be detailing my own personal cars not interested in any business at all . Just wanna get a nice set together and keep my car looking awesome. Thanks for your input .
 
David Hayward said:
For just casual detailing the GG6 will be fine. If I were just doing it as a hobby I would buy the GG6 with a meguiars da microfiber kit. The 5" kit and then 4 of the meguiars or lake country thin foam cutting pads and 2 of the foam polishing pads. That's enough to do just about anything and then even if you wanted to do a little side work it's capable of that too. Then past that just a compound and a finish polish, I like menzerna or Wolfgang. You may not need much but just to have a complete setup and since you said you don't mind spending a little money I would just go about this far in. It would be a great idea to research. The sales are hot right now but autogeek always has something going for sales and if you call and talk with Nick maybe he can help you out when you are ready.
Click to expand...
Well said:props:
 
The GG6 with a 5" backing plate and 5.5" pads can handle anything you throw at it with the right pads and products and it has a lifetime warranty. Buff and Shine has excellent pads with a recessed Velcro for an added margin of safety when polishing around protruding objects like mirrors etc. Also, get a 3.5" backing plate and 4" pads for the tight areas like bumpers.

And, make sure you get enough pads--trying to do an entire car with 1 or 2 pads is a surefire ticket to failure. Here's an article by Mike Phillips regarding the subject: http://www.autogeekonline.net/forum/ask-expert-featuring-mike-phillips/88109-how-many-pads-do-i-need-buff-out-my-car.html
 
You guy are great thanks for all the advise i will continue to read and learn from everyone on here thanks again.
 
Griot's Garage 6" is the way to go for a non-professional. Even though some professionals do use them, it's all that's needed to maintain your personal vehicles.
 
Personally I would go with a long stroke DA as long as the extra cost doesn't hurt. When I got my first polisher I had a hard time deciding between the 3401 and a GG6 since I only had my car to do I went with the GG6 but soon after I really wished I had went with the flex. A couple months ago I dropped my GG6 and broke the plastic cover over the gear case and found that it gets a little warmer than is comfortable on polishing and at that time I found that there was new long throw polisher out that was cheaper than the Rupes and Boss and I got it the Torq 22D. I found that it was no harder to use than the GG6 once I got used to the longer handle and was a little more particular with keeping the pad level to keep it rotating. The best thing is it takes about half the time to do the same amount of correction. I have both the 5" and 6" back plates and for me it seems easier to control with the 6" plate. I also found it easier to control with the longer handle on the vertical surfaces. Everything I said about my 22D would apply to the higher quality Rupes and Boss polishers. As far as weight goes I weighed them and with a 6" back plate my 22D weighed 7 ounces more than my GG6 with a 3.5" back plate.
One thing about having two now is I can have a dedicated one with a smaller pad for the tighter areas on the car without having to change back plates.

Like you I got mine just to do my car but I got a second car then I have done my brothers two (a lot of work since they are an Escalade and F150 extended cab), my daughters and my ex-wife/roommates car.
 
For comfort even if its just your own cars and you have the budget, RUPES. You will wish you bought it initially had you purchased the other cheaper stuff first.
 
every detailer/enthusiast should own at least one traditional PC-style DA (i've said this many times) and with that said the GG6 would be an excellent choice and there's not much you couldn't do given all the different pads/liquids that are out today. also, the warranty and customer service they provide is top notch!
 
get this now (with a variety of backing plates & pads)..
autogeek_2269_27859469


then this later...
griots-garage-boss-g21-long-throw-orbital-polisher-1.gif


:dblthumb2:

[ame]youtube.com/watch?v=FtpgZV9vL1A[/video]
[ame]youtube.com/watch?v=i8eIKCHq72A[/video]
 
VISITOR said:
every detailer/enthusiast should own at least one traditional PC-style DA (i've said this many times) and with that said the GG6 would be an excellent choice and there's not much you couldn't do given all the different pads/liquids that are out today. also, the warranty and customer service they provide is top notch!
Click to expand...

:iagree:
 
The budget is no issue at all I don't mind spending the money . I wanna learn how to properly use the polisher with out causing and damage to my cars. How much of a learning curve is there on the higher end polishers like the RUPES, FLEX ect ? As a beginner is that the way to go, from reading on AG many people have begun with a lower end polisher such as PC or GG6 as a starting point .
 
hosaltezza said:
The budget is no issue at all I don't mind spending the money . I wanna learn how to properly use the polisher with out causing and damage to my cars. How much of a learning curve is there on the higher end polishers like the RUPES, FLEX ect ? As a beginner is that the way to go, from reading on AG many people have begun with a lower end polisher such as PC or GG6 as a starting point .
Click to expand...

the GG6 is capable of doing what the rupes/flex can do with just a little more time (not much of a learning curve once you've had time behind it and use good technique). you can always buy the GG6 first and get the G21 and/or flex later (keep in mind buying a large throw DA first will not allow you to get into tight/smaller areas, so having a few different polishers is ideal). getting both the GG6 and G21 would be the an awesome combo! :xyxthumbs:
 
hosaltezza said:
The budget is no issue at all I don't mind spending the money . I wanna learn how to properly use the polisher with out causing and damage to my cars. How much of a learning curve is there on the higher end polishers like the RUPES, FLEX ect ? As a beginner is that the way to go, from reading on AG many people have begun with a lower end polisher such as PC or GG6 as a starting point .
Click to expand...

I started with the Harbor Freight DA polisher that was about 50 bucks. Not long after, ordered Boss G15. I'd say if money wasn't an issue go for a nicer one. Not really that hard to use, just watch some youtube videos. Although, I will still be using my HF with smaller backing plate and pads for the smaller areas. Will be nice to have two machines. Next black Friday or epic deal, will pick up a nicer mini polisher.
 
VISITOR said:
the GG6 is capable of doing what the rupes/flex can do with just a little more time (not much of a learning curve once you've had time behind it and use good technique). you can always buy the GG6 first and get the G21 and/or flex later (keep in mind buying a large throw DA first will not allow you to get into tight/smaller areas, so having a few different polishers is ideal). getting both the GG6 and G21 would be the an awesome combo! :xyxthumbs:
Click to expand...

:iagree: Just what I did--GG6 (with a 5" and 3.5" backing plate) for the first few years then added a G15 a few months ago. Now the GG6 is set with the 3.5"backing plate for those areas I can't reach with the G15. What a fantastic combo--has cut my polishing time in half.
 
You must log in or register to reply here.
Back
Top