What's in the box? Griot's BOSS G10 Pneumatic Polisher

[Mike PhillipsMike Phillips is verified member.]

What's in the box? Griot's BOSS G10 Pneumatic Polisher



What's in the box?

Let's take a look!

Included in the box are,

1. Griot's BOSS G10 Pneumatic Polisher
2. 24mm wrench
3. Owner's manual

Pictures but not included
5" Griot's Vented Orbital Backing Plate
6" Griot's Vented Orbital Backing Plate


The G10 pneumatic polisher comes equipped with either a 5 or 6 inch vented backing plate (your choice).

The G10 pneumatic polisher has the shape of a traditional pneumatic palm sander except she's a little smaller than average sized palm sanders making it lighter in weight and very easy to hold and grip.

The Paddle Throttle Control lever like most palm sanders is located at the top of the tool. As you grip the tool the palm of you hand depresses the lever bringing the polisher up to the speed set by the throttle.

The owner's manual is well written, comprehensive, detailed and complete. It walks you through how to assemble the tool for use plus recommendations for best performance when correcting, polishing and waxing paint.

Quick-Connect Air Fitting (not included)
In order to use the G10 pneumatic polisher you'll need to get a 3/8" x 1/4" quick-connect air fitting and using some thread tape attach it to the air inlet. You can pick one of these fittings up plus the thread tape at any hardware store.

:dblthumb2: :buffing: :dblthumb2:

 

[Mike PhillipsMike Phillips is verified member.]

Continued....



Attaching the backing plate
To attach the backing plate use the included 24mm wrench to hold the spindle secure.

As you can see in this picture, the spindle has to flat side for which to place the wrench.

Remove the rubber nut that protects the threads on the backing plate.

Compression Washer
Ensure the compression washer is in place before attaching the backing plate to the spindle.

Place the wrench on the spindle...

Align the threaded stud to the threaded bore in the spindle and then tighten till snug.

Ready to go!
Your BOSS G10 pneumatic polisher is now ready to create a work of art!

Autogeek.com


Griot's BOSS G10 Pneumatic Polisher




Pads and products sold separately

Griots Garage 5.5 inch BOSS Foam and Microfiber Pads

Griots Garage 6.5 inch BOSS Foam and Microfiber Pads

Griots Garage BOSS Fast Correcting Cream

Griots Garage BOSS Correcting Cream

Griots Garage BOSS Perfecting Cream

Griots Garage BOSS Finishing Sealant


:xyxthumbs:

 

[Mike PhillipsMike Phillips is verified member.]

***Bump***


:dblthumb2:

 

[axel06]

Wow now thats hot

 

[ViperGuy21]

That's cool! Also getting sneak peaks of the new 37 line in the background of those pics

 

[AGOatemywallet]

How different is this polisher from the 3M pneumatic palm sander

I found the 3M machine, great for sanding, but ineffective for compounding even 3000 grit scratches

 

[Mike PhillipsMike Phillips is verified member.]

How different is this polisher from the 3M pneumatic palm sander

I found the 3M machine, great for sanding, but ineffective for compounding even 3000 grit scratches

I think between they're threads I posted I addressed both topics you bring up.

I also have an article on using the 3m sander to polish paint as wellcasvan article on the history of polishing paint using DA sanders.

This tools is different - it works.

 

[craigdt]

Hey that's cool. I don't think I have a use for one but I'm glad there is yet another option.

 

[VISITOR]

awesome job Griot's!

 

[Joe@NextLevelDetail]

Such a awesome machine, Jeff brown has been quite a busy bee, can't wait to get my hands on this

 

[Mike PhillipsMike Phillips is verified member.]

Such a awesome machine, Jeff brown has been quite a busy bee, can't wait to get my hands on this

Yeah my hunch is Jeff was behind the introduction of this new tool or at least a part of the team.

At his core he's passionate about cars and car detailing.


:dblthumb2:

 

[Joe@NextLevelDetail]

Yeah my hunch is Jeff was behind the introduction of this new tool or at least a part of the team.

At his core he's passionate about cars and car detailing.


:dblthumb2:

Your hunch is right !

Jeff helped developed the machine and told me all about it!

He wanted to demonstrate it at MTE Orlando but he had no access to a air compressor , can't wait to try out that thing looks very promising and Jeff told me its a defect terminator.

 

[Caleb@ImpeccableImage]

Do you know if Jeff has any plans to develop a better 3" dedicated machine like the Rupes Lhr75e? Id be all in for that!

 

[Joe@NextLevelDetail]

Do you know if Jeff has any plans to develop a better 3" dedicated machine like the Rupes Lhr75e? Id be all in for that!

I asked! I'm highly anticipating a mini boss I think it would do exceptionally well.

However releasing the Boss system was a big feat for the team at Griots and Jeff brown really worked his tail off on that whole entire system and it is nothing short of amazing.

Hopefully in the near future we will be using a mini boss.

Can you imagine how sweet that thing will look ?

:beer::beer::beer:

 

[Caleb@ImpeccableImage]

I asked! I'm highly anticipating a mini boss I think it would do exceptionally well.

However releasing the Boss system was a big feat for the team at Griots and Jeff brown really worked his tail off on that whole entire system and it is nothing short of amazing.

Hopefully in the near future we will be using a mini boss.

Can you imagine how sweet that thing will look ?

:beer::beer::beer:

I can only imagine how awesome it would be. Hopefully it becomes a reality.