Car polishing

R

Rifay

New member
Joined
Apr 16, 2016
Messages
75
Reaction score
0
Hello sir i have das 6 DA polisher and carpro fixer.wic foam pad is good for those items???
 
Pad choosing

Hello sir,

i have GG 6" and carpro fixer.

wic pad is good for above both items??

plz help me
 
Pad

Hello sir,

i have GG 6" and carpro fixer, sonus paint cleaner, Poorboys black hole glaze

wic pad is good for above both items??

plz help me
 
Re: Pad choosing

Fixer works great with a medium cutting foam pad. It also corrects very well with Microfiber pads; although, it can leave substantial marring that will require a finishing polish to refine. With the right foam pad it can finish down flawlessly on certain paint systems. Best solution is to perform a test spot with a variety of pads to see which offers the best balance of cutting and finishing ability.
 
Re: Pad choosing

Will marr with a DA, not so much with a Rotary.
 
Re: Pad choosing

Use a different product and avoid all the extra work and headaches .Hd speed micro cutting pad works great.
 
Rifay said:
Hello sir i have das 6 DA polisher and carpro fixer.wic foam pad is good for those items???
Click to expand...


Technically if you're going to use a dual action polisher with CarPro Fixer then you would normally be trying to remove swirls, scratches, water spots and oxidation as Fixer is a compound. So for your DAS6 DA Polisher I'd recommend getting some foam cutting and foam polishing pads and then do some testing to see which pad is giving you the best defect removal results on the paint you're working on.


My strong recommendation would also be to get as follow-up polish to follow the Fixer step because in my experience Fixer needs a follow-up step in order for the paint to look good.


:)
 
In which follow up product i want to use after done with fixer???
 
But i have sonus paintwork cleaner and black hole glaze .

Above follow up product is enough after done with fixer???

Plz help me
 
Rifay said:
In which follow up product i want to use after done with fixer???
Click to expand...

A high quality polish.



Rifay said:
But i have sonus paintwork cleaner and black hole glaze .

Above follow up product is enough after done with fixer???

Plz help me
Click to expand...


Out of those two options I would go with the Poorboy's Black Hole Glaze and a soft foam polishing pad.

If you're new to machine polishing you really need to learn how to do a Test Spot. Read my article here,



How To Do a Test Spot



Read the article carefully and follow what it explains to do.

MAKE SURE YOU CAN MAKE ONE SMALL SECTION OF PAINT LOOK GREAT!

Before buffing out the entire car.


:)
 
It was recommend to me to use 5.5" pads for defect/swirl removal with a PC. The energy is more focused with 5.5" pads than it is with larger pads.
 
One more thing..

6 inch backing plate will accommodate 5.5 inch CCS foam pad ???

Plz help me
 
That's mean I can't use 5.5" pad on 6" backing plate

Correct????
 
You must log in or register to reply here.
Back
Top