Twist plug cord for Polishers.

jehsautosalon

jehsautosalon

New member
Joined
Nov 16, 2014
Messages
24
Reaction score
0
Hello guys, i just got a pelican hard case container for my Pe-8 and Flex 3401. O don't like how the wires are sticking out.I am just wondering if any of you have done a twost plug cord for your polishers? Thank you. 👍🏼
 
I have. The cord doesn't stick out. You don't need to tie it hard just a small loop so the cord stays secure

Sent from my LG-H811 using Tapatalk
 
Hi Sorry for the delayed response. I used Neutrik Powercon Truecon connectors. PLEASE KEEP IN MIND THIS WILL VOID YOUR WARRANTY, if you are still under warranty.

The connectors are relatively easy to install if you're handy. You do need a relatively tiny torx screwdriver to tighten the connections to the conductors. In short, you buy an extension cord of whatever length you prefer, in the thickest gauge required to run your most powerful tool; I recommend 12 gauge. You cut the female end of the extension cord off. You cut the male ends of the tools off. You install male connectors on the tools and a female connector on the extension cord. You can buy these on am a zon. THey're water tight and are rated for loaded disconnect; in other words, you can disconnect them while the tools are running if you need to, for whatever reason.

Edit: Yes, they absolutely hold up. These types of things are frequently used by touring musicians and are built to withstand the abuse of many connects/disconnects and the beating they take from being constantly used for gigs.

Edit 2: I'm a hobbyist detailer, just do stuff for myself or teach friends and family the ropes. Just detailed one of my Porsches for an autism awareness charity car show. Nothing to do with this thread, but since I'm here:
View attachment 50496
 
Oops

Oops; weird. Pic never showed up, but it does on my phone app.
View attachment 50541
2014, picked it up with 5k miles in September of last year, currently already have 12k miles on it, tracked it, taken it to rallies (doing Corsa America next year), drive it hard, daily driver, all year round (sleet and snow) and its been to Florida and back, with my wife in the passenger seat and my 80lb pit in the back. This pic was just taken on Saturday, the paint has taken a beating but I'm happy with the results. The frequency with which I need to detail would would take me forever if I had to deal with the hassle of a million tangled cords each time. Next detailing project will be my GT4 in a few weeks.
 
Those are bad ass! No more plugs coming undone or tying an overhand where cords join to keep them together. You can buy a cord with your choice of male or female end on it up to 100' length. 1 long cord to a locking plug on the working end & water resistant. Sounds perfect!
 
I got the neutrik powercon and some 16 gauge wires. Still double thinking if I should change my power cord. Don't wanna fix what's not broken 😅. But everytime I google festool and I see the rupes and the flex pe8 with it I feel jealous! I really wanna put it on a pelican container.
 
It really isn't necessary to change the connectors out. You can just loop the ends around and then connect them. I do that all the time, not just on my polisher, but all tools that could have disconnections. Never fails, and both the tool's power cord and the extension cord both stay usable with other extension cords and tools.
 
I might think a lot of people here may have dedicated cords for their polishing tools so it wouldn't be a bad idea to swap the plugs for twist lock style.
 
kkritsilas said:
It really isn't necessary to change the connectors out. You can just loop the ends around and then connect them. I do that all the time, not just on my polisher, but all tools that could have disconnections. Never fails, and both the tool's power cord and the extension cord both stay usable with other extension cords and tools.
Click to expand...

Yeah, but it's not as kewl. :)

One of these works well, too.
 
You must log in or register to reply here.
Back
Top