Pressure Washer

Check autogeek store under the cannon. It lists all the fittings. All K series PW's will use the K series washer except one.

"The Foam Cannon HP attaches to the trigger/gun assembly for your pressure washer in the exact same way that your wand currently does.You will just need to remove the wand and look at the fitting that you currently have and match it up to one of the fitting that we offer below. The Foam Cannon HP will connect in exactly the same way. Note: If you have a Karcher K3 X Series pressure washer you will need the Karcher HD/HDS fitting in addition to the Karcher X Series fitting (Sold Separately)."

Wolfgang Foam Cannon HP, foam lance, car wash foamer, pressure washer foam gun
 
I got the Karcher G2700 PSI Gas Pressure Washer and hoping to order a foam cannon this weekend
 
aztec1987 said:
I had to do research and search the seven seas to find a adapter that fit the AR and to top it off it still leaked from the connections and you can hear the pump working harder to push out the foam.
Click to expand...

? I got the MTM foam cannon with the quick connect...everything hooks up very well and no leaks whatsoever.
 
I got some third part connectors, a year later the unit gave out and switch to gas......never again I turned back
 
got a picture of the quick connect ends and end of the wand which adapter do I need to find for the foam cannon when I order it

IMG_8090_zps2cq2pioi.jpg

IMG_8091_zpsn0gbeyyk.jpg

IMG_8092_zpsoir53r8f.jpg

IMG_8093_zpsv0g1fpp2.jpg
 
I prefer the gas pressure washers. I have the Generac One Wash and I love it. Has four settings - the lowest is for autos - 2000 psi @ 2.8 gpm. Highest is 3100 psi and is great for sidewalks.
 
gordster1122 said:
got a picture of the quick connect ends and end of the wand which adapter do I need to find for the foam cannon when I order it

IMG_8090_zps2cq2pioi.jpg

IMG_8091_zpsn0gbeyyk.jpg

IMG_8092_zpsoir53r8f.jpg

IMG_8093_zpsv0g1fpp2.jpg
Click to expand...

I am pretty sure you just need the standard 1/4" quick connect. Not one that is specific to a manufacturer.
 
Sounds interesting, maybe put it at high setting when I see my x gf walking by and blast her with a nice shower
 
I have Roybi 2000 psi and 1.2gpm, I can't get thick foam.. It's wont cling that much, May i ask.. Is there a foam gun for low electric pressure washer? are they all the same? if possible that electric washer can create thick foam like this video?
https://www.youtube.com/watch?v=0PlGcUVykh4

Soap have tried.. Hyper wash, mr pink, honeydew, from 2 oz to 6 oz still not able to achieved. is there a foam lance or mtm foam gun for low pressure power washer? thanks
 
Just a small point, the foam ideally wants to be thick enough to cling a little but run after a minute or so...

Having it like a mouse won't allow the soap the lift and carry the crap off the car ahead of rinsing....

So aside from being fun, not sure if the performance benefit of what you might be striving for......

The paint condition has a lot of impact on this.. Fully waxed and slick, the foam slides off quicker.. But think about it.. It's obviously a lot cleaner anyway so having the foam sit for 5 mins is likely doing little or perhaps not required....

All the best ...
 
KevinDetailing said:
I have Roybi 2000 psi and 1.2gpm, I can't get thick foam.. It's wont cling that much, May i ask.. Is there a foam gun for low electric pressure washer? are they all the same? if possible that electric washer can create thick foam like this video?
https://www.youtube.com/watch?v=0PlGcUVykh4

Soap have tried.. Hyper wash, mr pink, honeydew, from 2 oz to 6 oz still not able to achieved. is there a foam lance or mtm foam gun for low pressure power washer? thanks
Click to expand...

There is a foam cannon for electric pressure washers with lower PSI and lower GPMs. It should say in the description or specs the recommended PSI and GPMs. I believe the GPMs has more to do with more foam then the PSI.
 
KevinDetailing said:
I have Roybi 2000 psi and 1.2gpm, I can't get thick foam.. It's wont cling that much, May i ask.. Is there a foam gun for low electric pressure washer? are they all the same? if possible that electric washer can create thick foam like this video?
https://www.youtube.com/watch?v=0PlGcUVykh4

Soap have tried.. Hyper wash, mr pink, honeydew, from 2 oz to 6 oz still not able to achieved. is there a foam lance or mtm foam gun for low pressure power washer? thanks
Click to expand...

Yes MTM makes a model for electric PW, Can't link to it as it's not sold by AG.
 
KevinDetailing said:
I have Roybi 2000 psi and 1.2gpm, I can't get thick foam.. It's wont cling that much, May i ask.. Is there a foam gun for low electric pressure washer? are they all the same? if possible that electric washer can create thick foam like this video?
https://www.youtube.com/watch?v=0PlGcUVykh4

Soap have tried.. Hyper wash, mr pink, honeydew, from 2 oz to 6 oz still not able to achieved. is there a foam lance or mtm foam gun for low pressure power washer? thanks
Click to expand...

Those are all good soaps for producing good foam. I think the correct foam lance/cannon will do the trick.
 
ellens2 said:
Yes MTM makes a model for electric PW, Can't link to it as it's not sold by AG.
Click to expand...

Yes, MTM makes one for electric PWs and one for gas (more powerful) PWs. It's important to choose the right one for good foam action.
 
You must log in or register to reply here.
Back
Top