Rupes lhr19e (rotary) thread size?

V

Vanquish Auto

New member
Joined
Jun 14, 2016
Messages
245
Reaction score
0
Does anyone know what the thread size and pattern is on the Rupes rotary? I am trying to find out for extended arm and various sized backing plates. I really don’t see Rupes releasing these items for the rotary. So I figured I would go ahead and pick them up elsewhere.
 
The rotary was 14mm shaft size. That may have been a non USA model. Try calling them in Colorado.
 
Thanks for the reply. I would think it would be the same. I’ll see what they say though.
 
North American polishers are usually 5/8", European standard is M14 (14mm), The PE14-2 is 5/8" shaft (I own one, and can say that with certainty). When John from Forensics Detailing on Youtube reviewed it, it was an M14 shaft size,
 
Vanquish Auto said:
Does anyone know what the thread size and pattern is on the Rupes rotary? I am trying to find out for extended arm and various sized backing plates. I really don’t see Rupes releasing these items for the rotary. So I figured I would go ahead and pick them up elsewhere.
Click to expand...

The EURO version will have a M14 thread.

The USA/NA version will have a 5/8th thread.

The M14 euro backing plates will have a different color threaded insert. I think euro is blue and USA is red, but I'm not 100% on that.
 
Thanks for the response Todd. Kyle messaged me this morning letting me know everything I need. I look forward to trying it out.
 
My LH19E M14 is the blue thread so American 5/8” should be red thread.
 
Todd@RUPES said:
The EURO version will have a M14 thread.

The USA/NA version will have a 5/8th thread.

The M14 euro backing plates will have a different color threaded insert. I think euro is blue and USA is red, but I'm not 100% on that.
Click to expand...

Do you have any idea when the Skorpio E is expected to come out Todd?
 
You must log in or register to reply here.
Back
Top