Yesterday I was able to wash my car. The last one I did a couple of days before new year. Then it was also protected with Carpro Hydro2 lite. And to my surprise it has failed totaly on the side panels down and up half way to the side windows. I thought they would be revived when the degreaser was done and the 2bm with Reset useally revive a clogged LSP. But last winter I could apply Gyeon Wet Coat monthly 3 times before winter came. So maybe I got a thicker LSP that way.
Either way I feel like the Hydro2 lite has stayed cleaner visually. The road salt and the tar spots where there. And the truckwash that the wash bay have took care of the road salt and other grime. Then a tar degreaser took almost all of the tar spots off. But the last ones I used Carpro TarX on and I don't aggitate it and just use the water pressure from the PW to clean with. The 2bm wash with carpro reset cleaned up the last little of dirt left. The rinse bucket is almost clean after the wash and that's how I like it.
I had a plan to apply one of my favorite spray shine product but in a stronger version. But the nerve damage I have did so the pain level was high at this moment. So I used Hydro2 lite again and wiped it in with a mf wash pad to get a longer longevity from it. Man is that slick when wiped in. Applyied to a couple of panels and rinsed off thoroughly with the PW and also a last thorough rinse off before dried it.
I was at the wash bay I have access to some times. They wash semi-trucks of different kinds and other machines in there. So it's not a pretty place but gets the work done.
Here's when the doors are opened.
This is what I have to deal with.
The PW setup is 2 PW and 2 degreaser wands. I took a look at the water pressure from the PW and it was only 1500psi at the pumps. I have a PW with 2600psi 2.6gpm and this is not near the power from those 2. The gpm I would estimate is 4gpm or more. They are on 440v electric outlets and the wand if not holding strong will rise up fast and even can push you if you are not ready when starting to spray. So cleaning works great at a feet away of the car with the nozzle tip. In the picture I clean of the tar degreaser.
Two set of wands on both sides 1 the PW wand and the other the degreaser wand. And you can move them all of the way down to the other side hanging from the roof.
Some pictures of the finished results
Thanks for watching and reading
/ Tony
Lol. 
Lol.
