What did you do today, in regards to detailing?
- Thread starter Eldorado2k
- Start date
It's that small black box at the top right of the picture. It's an Active VE51. Puts out 1650 PSI, but more important, generates ( supposedly) 1.8 GPM which was my priority. It was dirt cheap . The VE52 has better specs but has been sold out.
I had my SunJoe 3000 hanging in that area but it was starting to die on me and I wasn't ready to step up and get a unit like Daviddear yet. I was going to just buy another SunJoe but the size factor of this one caught my eye so I'm giving it a try. So far, with the right tip it is performing every bit as well as the SunJoe.
oneheadlite
Well-known member
- Aug 20, 2015
- 1,795
- 100
Made a stow and go container for my recently upgraded G8 and G9. Being in MN, all my stuff lives in the basement - now it’s easier to grab both polishers.
I was gonna do a foam insert to hold them, but with both the 10ft and 25ft cords, 2,3,5, and 6” backing plates and the pad brush, they settle in awfully nice.
I was gonna do a foam insert to hold them, but with both the 10ft and 25ft cords, 2,3,5, and 6” backing plates and the pad brush, they settle in awfully nice.
MisterSnoop
Well-known member
- Sep 15, 2020
- 2,278
- 532
I actually did this a few months ago with a foam insert.Made a stow and go container for my recently upgraded G8 and G9. Being in MN, all my stuff lives in the basement - now it’s easier to grab both polishers.
I was gonna do a foam insert to hold them, but with both the 10ft and 25ft cords, 2,3,5, and 6” backing plates and the pad brush, they settle in awfully nice.
oneheadlite
Well-known member
- Aug 20, 2015
- 1,795
- 100
I actually did this a few months ago with a foam insert.
Nice! I was looking at that pluck out foam while I was thinking of how I might do it.
I’ve kinda got limited storage space to work with, so I wanted the smallest box I could get away with.
DFB
Well-known member
- Aug 12, 2019
- 4,880
- 2,941
Maintenance washes for the Ranger and Mustang this week.
Being a gardener, my hands are often pretty grotty which in turn ends up transitioning to the interior touch points. Perfect chance to try a couple of new additions.
And the Mustang did some daily driving duties last week, so it just had to be detailed. :laughing:
Being a gardener, my hands are often pretty grotty which in turn ends up transitioning to the interior touch points. Perfect chance to try a couple of new additions.
And the Mustang did some daily driving duties last week, so it just had to be detailed. :laughing:
DFB
Well-known member
- Aug 12, 2019
- 4,880
- 2,941
Thank you good Sir, my choice of Race Red was not negotiable!
My car arrived at the dealer along with two other pre-sold Race Red Mustang's.
Race Red made up over 23 per cent of total orders when the Mustang went on sale in Australia 6 years ago.
Big Dave
Well-known member
- Jan 7, 2018
- 3,865
- 2,297
I've never had a red car, it's been all silvers, blues, and whites. Sounds boring now that I think about it.Thank you good Sir, my choice of Race Red was not negotiable!
My car arrived at the dealer along with two other pre-sold Race Red Mustang's.
Race Red made up over 23 per cent of total orders when the Mustang went on sale in Australia 6 years ago.
Sent from my F8331 using Tapatalk
PaulMys
Active member
- Jan 14, 2014
- 10,772
- 3
Man, you aren't kidding.
The dealer I work for is small, and we usually have between 75-95 new units on the lot. It seems like one big sea of Black, White, Gray, Silver, and Dark Blue.
:dunno:
Coatingsarecrack
Well-known member
- Dec 9, 2018
- 7,882
- 566
Neighbors got a race red with the red interior. Love the color.
Sent from my iPhone using Tapatalk
Klasse Act
Well-known member
- Feb 21, 2012
- 27,704
- 2,702
I can't wait to get home in a bit and wash the ES
Sent from my SM-G950U using Tapatalk
Sent from my SM-G950U using Tapatalk
Klasse Act
Well-known member
- Feb 21, 2012
- 27,704
- 2,702
Klasse Act
Well-known member
- Feb 21, 2012
- 27,704
- 2,702
So after a week of salt dust, driving through puddles and thawing snow that makes a lane a mess, it was time for the other therapy, the SAW
Started out with Brake Buster in my IK Pro2 and this thing is pissing me off, doesn't foam like my smaller IK or my IK 1.5. I've changed the filter, took it apart and rinsed everything and it worked great when I did that but a week later not so much
I got the tires/wheels looking great and while rinsing them the beading was AWESOME! I have Meg's HCW @4:1 laid down from 2 weeks ago but last week I put the graphene detailer I'm beta testing on them, really impressive!
I then turned my attention to the car itself and reached for Griot's Garage Brillant Finish RW (4 ounces to 3 gallons for me, a tad more product) Damn I love this stuff, seriously. I used the usual 5 plush, edgeless mf towels and my 1000 ML Kwazzer and knocked it out.
I then turned my attention to the engine bay, it was in need of good cleaning! I used some of the left over RW and designated mf towel and did a good enough job until spring is here where I'll grab the Alien Kleen, some brushes and my Worx hydroshot @ low pressure and really get after it, this cleaning today makes that job easier going forward. I also wiped the door jams good with a left over mf towel from the wash, as well as my exhaust tips and muffler (yep, my car has REAL exhaust tips, what a concept
)
For the tires I reached for Griot's Garage tire prep, really liking this more and more. It left the tires clean and natrual looking. For dressing I applied 2x's "Eve's better half" graphene tire dressing and I really like it. I'll be beta testing a new graphene tire dressing in the near future, can't wait for that.
To finish up the ES I grabbed a new product in my collection...P&S Paint Gloss. After watching a review of this product I had to get some, so I did. This product is awesome at what it does, finished out nicely and smells like candy. I even put some on the rims, even though it didn't need it
I'm running a load of mf towels and my alarm is ringing to tell me they're done, so I've gotta go. Gold medal to those who read through all this, LOL
Sent from my SM-G950U using Tapatalk
Started out with Brake Buster in my IK Pro2 and this thing is pissing me off, doesn't foam like my smaller IK or my IK 1.5. I've changed the filter, took it apart and rinsed everything and it worked great when I did that but a week later not so much
I got the tires/wheels looking great and while rinsing them the beading was AWESOME! I have Meg's HCW @4:1 laid down from 2 weeks ago but last week I put the graphene detailer I'm beta testing on them, really impressive! I then turned my attention to the car itself and reached for Griot's Garage Brillant Finish RW (4 ounces to 3 gallons for me, a tad more product) Damn I love this stuff, seriously. I used the usual 5 plush, edgeless mf towels and my 1000 ML Kwazzer and knocked it out.
I then turned my attention to the engine bay, it was in need of good cleaning! I used some of the left over RW and designated mf towel and did a good enough job until spring is here where I'll grab the Alien Kleen, some brushes and my Worx hydroshot @ low pressure and really get after it, this cleaning today makes that job easier going forward. I also wiped the door jams good with a left over mf towel from the wash, as well as my exhaust tips and muffler (yep, my car has REAL exhaust tips, what a concept
)For the tires I reached for Griot's Garage tire prep, really liking this more and more. It left the tires clean and natrual looking. For dressing I applied 2x's "Eve's better half" graphene tire dressing and I really like it. I'll be beta testing a new graphene tire dressing in the near future, can't wait for that.
To finish up the ES I grabbed a new product in my collection...P&S Paint Gloss. After watching a review of this product I had to get some, so I did. This product is awesome at what it does, finished out nicely and smells like candy. I even put some on the rims, even though it didn't need it
I'm running a load of mf towels and my alarm is ringing to tell me they're done, so I've gotta go. Gold medal to those who read through all this, LOL
Sent from my SM-G950U using Tapatalk
Coatingsarecrack
Well-known member
- Dec 9, 2018
- 7,882
- 566
So after a week of salt dust, driving through puddles and thawing snow that makes a lane a mess, it was time for the other therapy, the SAW
Started out with Brake Buster in my IK Pro2 and this thing is pissing me off, doesn't foam like my smaller IK or my IK 1.5. I've changed the filter, took it apart and rinsed everything and it worked great when I did that but a week later not so much
I then turned my attention to the car itself and reached for Griot's Garage Brillant Finish RW (4 ounces to 3 gallons for me, a tad more product) Damn I love this stuff, seriously. I used the usual 5 plush, edgeless mf towels and my 1000 ML Kwazzer and knocked it out.
I then turned my attention to the engine bay, it was in need of good cleaning! I used some of the left over RW and designated mf towel and did a good enough job until spring is here where I'll grab the Alien Kleen, some brushes and my Worx hydroshot @ low pressure and really get after it, this cleaning today makes that job easier going forward. I also wiped the door jams good with a left over mf towel from the wash, as well as my exhaust tips and muffler (yep, my car has REAL exhaust tips, what a concept
For the tires I reached for Griot's Garage tire prep, really liking this more and more. It left the tires clean and natrual looking. For dressing I applied 2x's "Eve's better half" graphene tire dressing and I really like it. I'll be beta testing a new graphene tire dressing in the near future, can't wait for that.
To finish up the ES I grabbed a new product in my collection...P&S Paint Gloss. After watching a review of this product I had to get some, so I did. This product is awesome at what it does, finished out nicely and smells like candy. I even put some on the rims, even though it didn't need it
I'm running a load of mf towels and my alarm is ringing to tell me they're done, so I've gotta go. Gold medal to those who read through all this, LOL
Sent from my SM-G950U using Tapatalk
Ik’s garbage bro! Go for the Marolex won’t regret it. You can get them where you get your towels at in Texas.
The hydroshot for the engine is a great idea. May be the reason I finally buy one.
Sent from my iPhone using Tapatalk
Klasse Act
Well-known member
- Feb 21, 2012
- 27,704
- 2,702
I'm about to go outside and so an interior detail on the ES. Its going to be glass cleaned, dash cleaned and treated, door panels cleaned and treated and finishing up with cleaning the leather seats and treating them to a coating. I'll have pics and products used coming up, stay "tuned"
Sent from my SM-G950U using Tapatalk
Sent from my SM-G950U using Tapatalk
Klasse Act
Well-known member
- Feb 21, 2012
- 27,704
- 2,702
So it's going to mid 60's starting tomorrow and going into Wed, so I decided to get the interior cleaned up, inparticular coat the seats, so let's get started.
I started by cleaning the windows, everyone's favorite chore I used DG glass cleaner and some paper towel but will back over them tomorrow to get them perfect. Next up I grabbed the 303 Interior cleaner and cleaned the dash, door panels, console, backs of the seats and rest of all interior trim. Next up were the 303 Interior protectant wipes. I was given these when I toured the Gold Eagle facility (parent company to 303) a couple years ago. They are convenient but in prefer their protectant and a square applicator, so I wanted to use these up. It leaves the classic 303 finish, a natrual sheen...perfect! Moving along I grabbed the Connelly leather cleaner and big barrel brush to clean the seats real good, all crevices and perforated sections, dried and moved along. I also cleaned the steering wheel, ahiftknob and door jam inserts, all leather. The final step was applying Gyeon Leather Shield, a leather coating. This was very easy to use, no problems and now it cures and will be well protected for quite a while
It was cold last night, down to 18 degrees and the ES was frosted, so after looking it over after the interior detail I was like "yeah, it needs a wipedown" Since I liked the P&S Paint Gloss from yesterday i used it again, pretty solid product for what it is
Now the car sits till tomorrow where it will probably get salt dusted again, atleast it's supposed to rain Wed and Thursday, the only time I cheer for rain...to wash the winter mess off of the road
Sent from my SM-G950U using Tapatalk
I started by cleaning the windows, everyone's favorite chore
I used DG glass cleaner and some paper towel but will back over them tomorrow to get them perfect. Next up I grabbed the 303 Interior cleaner and cleaned the dash, door panels, console, backs of the seats and rest of all interior trim. Next up were the 303 Interior protectant wipes. I was given these when I toured the Gold Eagle facility (parent company to 303) a couple years ago. They are convenient but in prefer their protectant and a square applicator, so I wanted to use these up. It leaves the classic 303 finish, a natrual sheen...perfect! Moving along I grabbed the Connelly leather cleaner and big barrel brush to clean the seats real good, all crevices and perforated sections, dried and moved along. I also cleaned the steering wheel, ahiftknob and door jam inserts, all leather. The final step was applying Gyeon Leather Shield, a leather coating. This was very easy to use, no problems and now it cures and will be well protected for quite a whileIt was cold last night, down to 18 degrees and the ES was frosted, so after looking it over after the interior detail I was like "yeah, it needs a wipedown" Since I liked the P&S Paint Gloss from yesterday i used it again, pretty solid product for what it is
Now the car sits till tomorrow where it will probably get salt dusted again, atleast it's supposed to rain Wed and Thursday, the only time I cheer for rain...to wash the winter mess off of the road
Sent from my SM-G950U using Tapatalk