Wolfgang silica spray?

[Lawndawg]

What am i doing wrong with the spray? I’m streaking it up bad. Help please #
Sprayed on wiped then flipped to buff but streaks aren’t buffing. Thank you!

 

[DETAILROOKIE]

What am i doing wrong with the spray? I’m streaking it up bad. Help please #
Sprayed on wiped then flipped to buff but streaks aren’t buffing. Thank you!

That happens to me when I use too much product. It is a really annoying. Are spraying the panel or onto the towel?

Sent from my SM-N960U using Autogeekonline mobile app

 

[Lawndawg]

Sprayed panel until realized what i was doing. Then Mf rest of the way. Still did it some but not as bad. Should say it’s on top of Wolfgang ceramic if that makes a dif.

 

[PaulMys]

Sounds like too much product used.

It's hard to imagine for some, but one little spritz onto a MF towel can cover several square feet with many products.

 

[waterman]

Sprayed panel until realized what i was doing. Then Mf rest of the way. Still did it some but not as bad. Should say it’s on top of Wolfgang ceramic if that makes a dif.

Hello,

How old is the coating? Maybe try to use some iron remover. I use the same combo and noticed after I did the decon the silica spray was easier to remove. It’s possible it was just my imagination. Also, it was mentioned in another thread that maybe you should try using different towels.

 

[Coatingsarecrack]

I’d also recommend using a separate MF for applying and removing. No more than a spray or two per panel. 3-4 on hood


Sent from my iPhone using Tapatalk