Oh, so you did it! This will be an interesting forum topic of discussion, whether it's better to use acid/alkaline prep products, or just blast everything off with standard RW mix at 350psi.
Screw pressure on straight up dirt, just pushes it right into the paint, we all know better now than say years and years ago
Just from my first experience, using a RW with more pressure still won't equal using a good pre-wash like Touch-Less. It doesn't remove dirt the same way those lovely high pH surfactants do. I've got a mobile maintenance wash in a few weeks and this customer always makes sure to let her SUV get as filthy as possible so that's when I'll really be able to see how effective this machine is. I'll report back when this happens.
I agree about the good pre-wash during a traditional 2BM....BUT, have you tried the Labocosmetica Preludio alkaline or acidic RW pre-treats
Nope. Have no use for it in my arsenal. Since I do this semi-professionally I keep my products to a minimum. I've pretty much got every need covered with my current line-up. But, now that I have this sprayer I'm going to probably repurpose my IK Multi 12 and put Touch-Less in it at 1.5% PIR and use that to pretreat heavily soiled vehicles. I've seen people rinse off Touch-Less with a hose and have no issues so with 350 PSI I should have more than enough power to rinse off Touch-Less. Now I just need a guinea pig to try this on.I agree about the good pre-wash during a traditional 2BM....BUT, have you tried the Labocosmetica Preludio alkaline or acidic RW pre-treats
Sent from my SM-G991U using Tapatalk
I was just cleaning the inside of the windshield of the Qashqai in the garage, mainly the finger smudges where the sun shade gets opened and closed, and had the same problem, so I hung the Ryobi work light off the garage door. I used Garage Therapy One Glass on one of the new twisted loop towels, which are very grabby on the interior glass, so I'll keep them for the exterior.Cleaned the windscreen/windshield of my mum's car with no sun out i had to use a work light on a stand with a sensor that went off every 5 minutes. Hop in hop out hop in hop out,
Product used Mckee's 37 20/20 Cockpit glass cleaner.scented.
Magic photo Roger, looks very Blade Runner like.Pre-work touch-free wash after all the rain yesterday, pre-wash was 3 oz of Griot's Garage Foaming Surface Prep in my 1000ml Mirolex sprayer
Sent from my SM-G991U using Tapatalk
Are you doing a shoot for the new "Carrie" movie....Pre-work touch-free wash after all the rain yesterday, pre-wash was 3 oz of Griot's Garage Foaming Surface Prep in my 1000ml Mirolex sprayer
Sent from my SM-G991U using Tapatalk
How did it compare with just regular Invisible Glass
Been quite a while since I’ve used it but seems very similar. Dealing with the aerosol seemed more problematic than I remember.
They are selling that same can in Australia for $30 minus post so that's a NO from me to try it, i had a feeling the foam would just get everywhere.
That’s what I found
It is BUT not the Detail Co at $30 a can
I like a good comparison, so.......................It is BUT not the Detail Co at $30 a can
