How many coats?

B

Bridges

New member
Joined
May 4, 2008
Messages
45
Reaction score
0
Last weekend I gave my new cts exterior paint(black) a detail job. I did the the whole nine yards.
Washed and then clayed it. I went on to sip menzerna with an orange pad. From there I went on to polish PO85RD grey pad and the wipe down with top inspection. I got most of the swirling and scratches out. The next day I applied wgdps 3.0 with a blue pad.

I washed the car yesterday and it's as if I never applied a sealant last weekend. The paint looks like it has a dull film over it, couple new chips in the hood. Also today there was bird crap on the hood. Must of only been there baking in the sun for a few hours tops, to leave a good staining.

So now I polished half of the hood with nano polish and lc white pad. It got the bird stain out and shine the paint right back up. But every wipe with the cobra edgeless mf I get new scratches. I just can't win.

I guess now I'm going to go over the whole car again this weekend with nano and then maybe try wgdps or go with fuzion wax instead or maybe both I don't know.

What do I need to do to stay protected or will I always get a scratch,chip,stain. no matter what.

Thanks for reading and any input is very much appreciated.
 
Bridges said:
Last weekend I gave my new cts exterior paint(black) a detail job. I did the the whole nine yards.
Washed and then clayed it. I went on to sip menzerna with an orange pad. From there I went on to polish PO85RD grey pad and the wipe down with top inspection. I got most of the swirling and scratches out. The next day I applied wgdps 3.0 with a blue pad.

I washed the car yesterday and it's as if I never applied a sealant last weekend. The paint looks like it has a dull film over it, couple new chips in the hood. Also today there was bird crap on the hood. Must of only been there baking in the sun for a few hours tops, to leave a good staining.

So now I polished half of the hood with nano polish and lc white pad. It got the bird stain out and shine the paint right back up. But every wipe with the cobra edgeless mf I get new scratches. I just can't win.

I guess now I'm going to go over the whole car again this weekend with nano and then maybe try wgdps or go with fuzion wax instead or maybe both I don't know.

What do I need to do to stay protected or will I always get a scratch,chip,stain. no matter what.

Thanks for reading and any input is very much appreciated.
Click to expand...
First of all is the cobra new and if so, did you wash it first. 3.0 and Fuzion should be a good combo.
 
Sorry forgot to mention it, yes they are new but they have been washed a couple times.

Would applying a couple coats of fuzion put a nice hard coating over the paint for good protection?
 
Bridges said:
Sorry forgot to mention it, yes they are new but they have been washed a couple times.

Would applying a couple coats of fuzion put a nice hard coating over the paint for good protection?
Click to expand...
I just did 2X Fuzion. I always do nuba's twice, but the key is thin, thin, thin.
 
BTW how many mf's do you have? No sense in using the same one that is scratching your paint.
 
I bought one polishing pack(COBRA-900) which I have six mf's.

Should I use something else instead? What's the top of the line?Something that is pretty much a guarantee to not scratch.
 
Bridges said:
I bought one polishing pack(COBRA-900) which I have six mf's.

Should I use something else instead? What's the top of the line?Something that is pretty much a guarantee to not scratch.
Click to expand...
Sorry I don't think it's right for me to recommend a mf on Auto Geeks site. Cobra is their best selling brand of mf's. Did you try the others with the same results? If so, I would PM Megan and tell her your problem. It seems that you are doing everything right, including doing a final wipe down after polishing. Are you doing your work in a garage or outdoors?
 
I will try them all out again, if worse comes to worse I can use them for the interior.

I'm doing my work in a 20x20 closed tent.
 
Good Luck, sorry I couldn't help. Do call AG they are real helpful people. I feel for you, remember your black paint is not a color, but a part time job.
 
wash towels well, I prefer the specific MF cleaners like Microrestore, and most importantly store outside of dust and dirt. I use ziplocks.
 
I think the problem is the Mf collects the fine particles from the polish and that can cause scratching.

How are the new grey Mf for buffing off polish and wax? I read alot people using them for QD'ing but what about polish removal?
 
You must log in or register to reply here.
Back
Top