WG SEALANT help asap!!!

Should be fine. It needs to cure overnight without any water getting on it, including DEW.
 
yes it is fine apply away. if the vehicle was not garaged i would be worried about dew interfering with the cure time or ruining the coat since it needs 12 hours to cure.
 
i used my udm with the blue lake country pad and i felt that i was wasting the product since it is a little watery. i agree with killr hand apply but if you have a microfiber bonnet for your pc use that to remove.
 
I use an applicator by hand. Just follow the directions. You apply it thin. It is very easy to apply and provides great results especially if applied 2x or more. Just be sure to wait 12 hours between coats.
 
marchese_alexander said:
is it the same technique has polishing?
Click to expand...

Not really. There is no need to work in a sealant - all you want to do is evenly apply it to the surface on a slow speed. You only want a thin film of product on the paint, anything more will be a waste of product.
 
I was going to start a new thread but thought poster may also benefit from answers to this question.

Is there any effect on how the sealant works if wg paint cleaner is applied first, or there is no advantage to it?
 
using a paint cleanser or polish prior to any paint sealant helps to make the surface pristine (or better) by removing contaminents and oxidation. That said, some paint cleanser have minor fillers and must be compatible with a sealant for proper adhesion and curing.
 
You must log in or register to reply here.
Back
Top