My Recent detailing

gioprivatemvoe

New member
Joined
Oct 20, 2009
Messages
33
Reaction score
0
My First Post...

Mercedes E240 Avantgarde, Black-Green.
My spot light doesn't work when i switched ON.
So i can't take detail progress on photo.

These are general photos before:
INTERIOR


P1020904.jpg


P1020905.jpg


P1020907.jpg




P1020910.jpg




P1020913.jpg


P1020915.jpg


P1020916.jpg






P1020922.jpg


P1020923.jpg


P1020939.jpg




P1020942.jpg


P1020957.jpg


P1020955.jpg


Leather 50:50 (Dirty and Clean)
ZOOM
P1020954.jpg



BODY

P1030004.jpg




P1030001.jpg


P1020895.jpg


P1020886.jpg


P1020884.jpg


P1020879.jpg


P1020961.jpg


Engine Hood before
KapMesin.jpg


Trunk panel before
Bagasi.jpg



After polishing before finishing w/ DA
P1020977.jpg


P1020999.jpg


InteriorFrontAfter.jpg


InteriorRearAfter.jpg


P1030010.jpg


P1030005.jpg


P1030006.jpg


Thanks for viewing. Any comments are welcome.
 
Last edited:
Nice job. How did you take care of that scratch on the lower panel near the tire well? Looks like it was down to primer. The after picture on the paint looks like it still has some marring. What machine and polish did you use? Was this a one step?
 
Thanks Rsurfer,

i just touch up it and polish it.
Which pictures do you see marring? i use DeWalt 849 CCS compound pad and followed by white CCS. and finishing with PC 7424 XP.
 
Thanks Rsurfer,

i just touch up it and polish it.
Which pictures do you see marring? i use DeWalt 849 CCS compound pad and followed by white CCS. and finishing with PC 7424 XP.
The after picture of the trunk hood, whatever that means.
 
That pics is just after white CCS, before finishing, i don't have the close up pics after using DA.
i'll edit my pics info :)
thanks mate.
 
Nice job, I had to go back and read where you put first post. Nice to see a strong first post, and great job on the interior!

P1020954.jpg
 
@wisemonkey
Thank you...

@Superdutytd
First i vacuumed all interior part.
remove carpet and clean carpet seperately.
then move to leather, just spray APC, let it dwell for 30 sec and then brush clean, wipe off with clean MF.
for smooth textile, i just spray APC to a clean MF then rub it, then wipe dry using another MF. For tougher stain, i mixed APC 1:5 (with warm water)
For dashboard, i just spray APC, wipe it with MF. for air vent i use detailing swab, toothbrush and mini detailing brush.
After all done, i give protectant and conditioner.
Tools used:
APC 1:10, 6-7 MFs, toothbrushes (medium and soft), detailing swab, mini detailing brush and leather/vinyl brush.
Protectant using Natural Shine, leather i use Lexol leather conditioner.
 
Back
Top