Easy way to get all around your tires.

F

f150smith

Member
Joined
Aug 30, 2009
Messages
56
Reaction score
0
Today I had my f150 in the driveway washing it like I always do and a guy in the neighborhood walked by, stopped and stared. I said hello and he looked at the tires and said WOW, that's a great idea. He was referring to the fact that whenever I wash one of our vehicles, I set out 4 2X6's, one in front of each tire and drive up on them. This gets all of the tire off the driveway enough so I can clean and dress them without having to move the vehicle. It kinda surprised me at how much he was amazed, but I've been doing my tires like this for more years than many of you have been around. I started doing this in my parents gravel driveway after I got my first car, which by the way was a hand me down 1964 Buick LeSabre. As I thought about his reaction, I felt compelled to share this.
 
f150smith said:
Today I had my f150 in the driveway washing it like I always do and a guy in the neighborhood walked by, stopped and stared. I said hello and he looked at the tires and said WOW, that's a great idea. He was referring to the fact that whenever I wash one of our vehicles, I set out 4 2X6's, one in front of each tire and drive up on them. This gets all of the tire off the driveway enough so I can clean and dress them without having to move the vehicle. It kinda surprised me at how much he was amazed, but I've been doing my tires like this for more years than many of you have been around. I started doing this in my parents gravel driveway after I got my first car, which by the way was a hand me down 1964 Buick LeSabre. As I thought about his reaction, I felt compelled to share this.
Click to expand...
Nice share. Do you set the edge of the 2x6 to the outer edge of the tire?

Maybe I won't have to roll the car back anymore or end up with that little blank spot where I missed the dressing? :laughing:
 
I like it; KISS Keeping it simple!! :xyxthumbs:
 
I either center the board or put it towards the inside so a little of the outer tread edge is actually hanging over the edge of the board. By the way, I've use 1X4's, 2X4's, or whatever scraps of lumber I have around. You only need to get the tires off the ground and inch or so to get around it completely.
 
Thanks for the great tip! :props: Not sure if I'll use it but if I do my hands and knuckles will certainly appreciate it.
 
Like my dad always says, you learn something new everyday! Nice tip, and it just so happens I have 4 2X6's just waiting to be used!
 
Now that is great! Really feel dumb for never, and I mean NEVER thinking of it.

Thanx!

Bill
 
That is a great idea! I'll have to try it. I better make sure the nails are out of them first, lol! But that makes the roof an inch and a half harder to reach.
 
I will definitely use this trick! I despise having to move my car to finish the tires, thanks for posting!

I also wanted to add my favorite method for applying tire gel, mostly because I just noticed that AG carries a similar brush to what I use- Vinyl & Leather Scrub Brush, I put a bead of gel on the brush (like toothpaste) and spread around the tire as much as possible. Almost no wasted product because the gel doesn't get absorbed, like foam applicators do.
 
Great little trick I always have to move it front or backwards to get the edges I missed, bad thing is my drive way is at an incline so I don't think that would be safe to do at least for me haha.
 
As others have said, this is a great tip. I will definitely give it a try!
 
Great tip! So now the question, who is going to market this in a way to make millions?
 
You must log in or register to reply here.
Back
Top