Mastering Rotary Crash course -Sun Day out detailing by KC

[kc's]

We had another hands on intense paint correctional class yesterday, another crash course - learning how to be a one day pilot

lesson start with washing - the car correctly - ONR

some young participant

some mature participants - on hands for paint correction - heavy stuff

paint before correction - after wash & clay

unavoidable swirls , RIDS & water mark

before pic

mostly contributed by the choice of cloths - esp - good morning cotten terry towel - ta da

as for me - i would choose plushy microfibers towel - contaminant pick during wash

surface contaminant pick during clay

otherwise it will be push further in when correctional carried out - removing the root cause

cheapest & best QD around - dilutables- for clay

the balance of ONR - left used for wheels washing

a 50/50 % compassionate before & after from left angle

paint issue - to be corrected

what we did was to segregate a few areas to test out the product & how it react over certain machine reaction
1st area for waxing with rotary

2nd area for consumer product with DA- basic polisher

wax applied prior polish

on rotary???

our host is given a chance to kick start 1st

2nd area for consumer range product

our pro - amateur detailer to be 2nd in line

look at the 123 steps of applications - in sequence

massage in like KBM - 3/4 twist with yr pure hands -

master at work

paint condition - there is much more much more paint damages that is unable to pick uo by our cameras

more

3rd contestant on rotary - with optimum hyper spray compound

lastly me - on rotary - with optimum hyper spray compound & stepping down from wool - cutting- polishing & finishing

results unveiling
one by one

 

[kc's]

product well worked out'

product test - swipe with yr finger to test whether the products worked out properly or not

1st area Wax with china make rotary???

hologram was visible once we remove the wax

2nd area consumer range product

before

after

visible cuts is still there


moving on the 3rd area - optimum hyper spray compound - with LC cutting pad & rotary

results unveils -
results base on the level of correction, gloss restored & clarity with depth

1st area
wax with machines

lack of correction & gloss & very little clarity

2nd area consumer (OTC) product with DA

better but lack of clarity & definition

3rd area Optimum hyper spray compound with LC cutting pad with makita

lastly
the 4th area - done with optimum hyper spray compound through out till finishing - with makita
wool - cutting pad- polishing pad - finishing pad
one product finish

a compilation picture

____________________________________________________________________________________

now mastering in rotary class

serious lesson going on

look how intense each participants is

mamamia - look at the finishing product

IPA - wipe down prior opti seal & wax

now the car is protected by Opti seal & Optimum car wax


_________________________________________________________________________________________
ta da pics

before

after wax by rotary

after

gloss restore

eleggantly yours

 

[kc's]

reflection

gloss

Dog scratches after remove - iwill get the before pic for u

more after dog scratches remove

possible pic

_______________________________________________________________________________________
before

before

after when u sent it to the road side - car wash for a quick wax polish 'so called"

hologram was visible once we remove the wax

before pic

after

making sure trails are always left for you to follow

remember to bring yr pen & paper the next time when ever you join a detailing lesson making sure
trials of gold nuggets are written down
choose this day
which finishing you like on your ride

have a great week ahead'

Happy New year

 

[sohail99]

Whoa!! super awesome as always!!

I just love you picture heavy posts! rops:

btw I see you have a modified DeWalt DW443

Incidentally I too own one. Can you show the modifications on it?
(I use it with the same 6" backing plate it comes with)
:hungry:

 

[BobbyG]

Kc,

I always look forward to your threads!

The information and photos are the best and clearly identified so that the reader can easily follow them through the post.

This test is a great example that shows both product and user performance and I particularity enjoyed the four section comparison! rops:

Superb work once again! :dblthumb2:

How come everyone's wearing those yellow glasses? :laughing:

 

[Flash Gordon]

k.c., the master detail instuctor rops:

 

[kc's]

Whoa!! super awesome as always!!

I just love you picture heavy posts! rops:

btw I see you have a modified DeWalt DW443

Incidentally I too own one. Can you show the modifications on it?
(I use it with the same 6" backing plate it comes with)
:hungry:

Thanks Sohail99 - for your kind words, you really know how to encourage me....
for I have only one passion - that is to help others of finding the path through...

as for once i was lost & incapable in finding out the truth
I know how frustrating it can be - when u tried your best & you only seems to get no where. going to the wrong people for advise & worse of all most meguiars shops technician here purposely gives the opposite instruction from the label. many guru scares to lose their reputation to others detailers.

as I have nothing to lose & i found out that I actually gain more when i lose - to be a giver than a taker

after all that i have been thru
I would only want to share & bless the world with the little knowledge I know. perhaps this is the best area of my contribution as it is my PASSION

I find joy in restoring cars, as i see deem & fit as it reflect pretty much of my life , for once i was broken & lost but now found & loved. You now the joy of being loved. after serving in a children homes for 7 years - i know the value of restoration & giving hope to these children means.....same applies here

I see the resemblance of my life similarly like in abuse car as for once i was abusing myself with all form of substance . Thank God for giving me a new start & I am able to share with you all....

I do not know how to thank each of you more- but just let me say one more thank you
for being around here, coming along side with me & my heart felt gratitude - you all is my truly guru's & I am proud to called u friends :iagree:

Thank you for your detailing ship :dblthumb2:

BTW the dewalts belong to one of the enthusiast never the less - i shall take more pics & share with u

Kc,

I always look forward to your threads!

The information and photos are the best and clearly identified so that the reader can easily follow them through the post.

This test is a great example that shows both product and user performance and I particularity enjoyed the four section comparison! rops:

Superb work once again! :dblthumb2:

How come everyone's wearing those yellow glasses? :laughing:

tahnk you sir

k.c., the master detail instuctor rops:

LOL u guys are my truly instructor - for your words forms my destiny :dblthumb2::dblthumb2::dblthumb2:

thank you

thank you


thank you


if there is a reason for thanks giving - it should be you guys

Phil 1 v3

 

[Fly bye]

Wow :xyxthumbs:

 

[kc's]

Wow :xyxthumbs:

:iagree:i only agree the wow truly belongs to yoo


Feed back please thanks for all yr wonderful encouragement

 

[DetailedByPrecision]

looks good as usual

 

[rakkvet]

Always awesome to see your work. I really like your willingness to teach. You are the Mike Phillips of Malaysia.

 

[kc's]

looks good as usual

HI Cg6LeMoN

thanks for your kind words

cheers

happy new year

 

[drivemax]

@KC
Like always good guru ...and nice job
Really love to see all yr work especially 50/50~~

BR

 

[kc's]

@KC
Like always good guru ...and nice job
Really love to see all yr work especially 50/50~~

BR

Thanks Br for your kind words


Happy new year

 

[tuscarora dave]

Very nice thread KCs. Nice work. I really like the clarity you have achieved with just one product and Hyper Compound at that!! Who would have thought.

Coming back from a low bottom place in life is truly God's Grace, an unwarranted gift for sure and your gratitude shines through in your giving spirit. :dblthumb2:

 

[dad07]

Very nice thread KCs. Nice work. I really like the clarity you have achieved with just one product and Hyper Compound at that!! Who would have thought.

Coming back from a low bottom place in life is truly God's Grace, an unwarranted gift for sure and your gratitude shines through in your giving spirit. :dblthumb2:

Very nice words Dave!

very nice work Kc! Teaching is a gift, and you teach with every post,keep up the great work!

 

[sharpcard]

Another great job and write up. I always like seeing the before and after pics of neglected finishes.

It's also nice to see someone working where there isn't snow and ice everywhere.

 

[kc's]

Always awesome to see your work. I really like your willingness to teach. You are the Mike Phillips of Malaysia.

Thanks rakkvet - for your kind words _ for i am just a shadow of this man

Mike is my true Hero & I am not even worthy to be compared to him

His loves & passion inspires me......He is a legend

Another great job and write up. I always like seeing the before and after pics of neglected finishes.

It's also nice to see someone working where there isn't snow and ice everywhere.

Thanks Buddy ..... LOL = i would love the other way round - as we only have one weather - hot hot hot hot

paint get so soft - you may even get marring from a microfibre cloths but the other now in yr garage yr paint is so hard like ice - LOL :hungry:

shall we meet in time machine to swap places :dblthumb2:

Cheers buddy

 

[kc's]

corrections
paint get so soft - you may even get marring from a microfibre cloths but on the other hand
now in yr garage yr paint get so hard like ice - I wouldn't want to try slice it