Recommend a polisher and sealant for outside truck

D

DJM86

New member
Joined
Jul 14, 2008
Messages
5
Reaction score
0
I will be purchasing a DA soon, either a PC or a Griot's. My truck is a 2008 white Tundra and I have to park it outside. I have read and searched numerous threads and info but haven't found an answer.

Which polisher and sealant would you recommend that will hold up to the outside and sun? I live in SoCal. Also, I will be buying some 5.5 inch foam pads. Which ones would you recommend? My paint is in decent condition. Minor swirls and some offroad brush marks from shrubs.

Thanks in advance!! :dblthumb2:
 
DJM86 said:
I will be purchasing a DA soon, either a PC or a Griot's. My truck is a 2008 white Tundra and I have to park it outside. I have read and searched numerous threads and info but haven't found an answer.

Which polisher and sealant would you recommend that will hold up to the outside and sun? I live in SoCal. Also, I will be buying some 5.5 inch foam pads. Which ones would you recommend? My paint is in decent condition. Minor swirls and some offroad brush marks from shrubs.

Thanks in advance!! :dblthumb2:
Click to expand...

Griots 6" DA along with 3 each of their two different pads. I wouldn't worry about buying the 5.5's at this time. You might also get 2 - 6'5" Surbufs. They will fit perfectly on the factory backing plate

Menzerna Power Gloss for your sealant
 
DJM86 said:
Which polisher and sealant would you recommend that will hold up to the outside and sun? I live in SoCal.

Also, I will be buying some 5.5 inch foam pads. Which ones would you recommend? My paint is in decent condition. Minor swirls and some offroad brush marks from shrubs.
Click to expand...


The GG has more power and maintains pad rotation under pressure better than other DA Polishers, this is helpful when doing any correction steps.

Thin, small diameter pads rotate better under pressure than large, thick pads. The Griot's Garage 6" pads are about 1" thick and the tool can easily rotate them but if you're going to be buffing more than just your truck then look into getting a 5" backing plate and 5.5" pads.

Any of the 5.5" pads work great, it really comes down to personal preference, the CCS, Flat and Hydro all will get the job done.

See this article as it has pictures of the pads and the backing plates plus links to the store for more specific information about each...

The principals discussed in the below thread apply to ANY DA Polisher including all the current versions...

How to maximize the ability of the 1st Generation Porter Cable Dual Action Polishers


This one is good too...

Thin is in... New Lake Country Hydro-Tech Low Profile 5 1/2 x 7/8 Inch Foam Pads



There's a lot of topical articles related to buffing out your truck in my article list...

How-To Articles


:buffing:
 
Flash Gordon said:
Griots 6" DA along with 3 each of their two different pads. I wouldn't worry about buying the 5.5's at this time. You might also get 2 - 6'5" Surbufs. They will fit perfectly on the factory backing plate

Menzerna Power Gloss for your sealant
Click to expand...

Flash, did you mean Power Lock? Power Gloss is a cutting polish not a sealant.
 
all sounds good . same recomendations i received when I asked for help . yet I'm topping powerlock with 845 .
 
You must log in or register to reply here.
Back
Top