845 streaking marks, how do i remove??

Q

qaz393

New member
Joined
May 22, 2011
Messages
307
Reaction score
0
how do i remove streaking marks that was applied 1 week ago??? the streaking is only noticeable under dim lighting
 
lol! 2 days after I ordered #845 from overwhelming positive reviews here comes a rash of complaint threads :)
 
PBoy said:
lol! 2 days after I ordered #845 from overwhelming positive reviews here comes a rash of complaint threads :)
Click to expand...

Don't worry, the only thing he can complain about is not properly removing the product ;)

Reapplying the 845 will remove the streaks.
 
Dubbin1 said:
Don't worry, the only thing he can complain about is not properly removing the product ;)

Reapplying the 845 will remove the streaks.
Click to expand...

:iagree:

It's a great product.
 
I've found that applying a light coat of 845 in straight lines (no pressure) and then removing it immediately after applying removes any streaking.
 
i just applied some 845 on my black car. only reason the hood streaked was becuase it was in direct sunlight. the other half that wasnt came off easy and looked great.
 
I have had this happen on more than a few occasions with 845. Usually its from applying too thick or using it while its really humid out, but any kind of streaking or haze from 845 was gone after the next wash for me
 
Have to jump in with another thin,thin,thin recommendation. Applied properly, 845 is a breeze to use. Two things that I found helping a lot were to replace the cap with a flip-top cap to better meter the product and use only a premium foam applicator such as Pinnacle, Optimum or Meg's. Lay a short ribbon on the pad and fold the pad over to work it evenly into the pad. I've already applied it late at night and not removed it until the next morning. If you do get streaks, try re-applying a super-thin coat to the streaked area.

Bill
 
do you supposed to mists the pad (with water/or qd)?
 
BillyJack said:
Have to jump in with another thin,thin,thin recommendation. Applied properly, 845 is a breeze to use. Two things that I found helping a lot were to replace the cap with a flip-top cap to better meter the product and use only a premium foam applicator such as Pinnacle, Optimum or Meg's. Lay a short ribbon on the pad and fold the pad over to work it evenly into the pad. I've already applied it late at night and not removed it until the next morning. If you do get streaks, try re-applying a super-thin coat to the streaked area.

Bill
Click to expand...


I agree with Bill THIN is in. I apply via da with crissom hydro pad its a dedicated pad so its always primed....I just seal it up in a zip-lock bag.
 
will putting dp max wax remove/level the streaking??
 
You must log in or register to reply here.
Back
Top