LC Flat 4" Will AG Carry It?

B

bogi094

New member
Joined
Feb 25, 2010
Messages
31
Reaction score
0
I currently have a bunch of 5.5" flat pads but how many people here are interested in 4" pads?

I don't like the CCS offering and as far as AG goes there's nothing else...
 
AG sells Cyclo 4-in pads and they are not as tall like the 4-in CCS spot pads.
 
Meguiar's makes 4" pads too. I haven't tried them yet, but would like to. They have a pad for each step in the paint correction process: cutting, polishing, and finishing.
 
I want smaller pads, like 3" pads. I see some 3.5" pads. I think if I am going to go smaller I want alot smaller I have 5.5" pads and they work great for most cars with tape. I know its a pain to swap backing plates, but some higher end cars need smaller pads for a professional finish.
 
bogi094 said:
I currently have a bunch of 5.5" flat pads but how many people here are interested in 4" pads?
Click to expand...

4" flats would be most welcome.


mg6045 said:
very good question. why in the world dont they already have them ??
Click to expand...

Good question, especially in light of all the 3" GG polishers that've gone out the door. Not much variety available in 3"ers. Everything LC makes is available from them in 3" sizes.

mg6045 said:
also, I would like to see them in low profile like the orange pad they offer.

In the meantime , this pad should hold you over for any serious correction purposes,

Lake Country 4 Inch Foam Pads Low Profile- Made of high quality foam, these pads have hook & loop backing all the way to the edges. The benefit of
Click to expand...

I use those and like 'em a lot!

weavers said:
I want smaller pads, like 3" pads. I see some 3.5" pads. I think if I am going to go smaller I want alot smaller I have 5.5" pads and they work great for most cars with tape. I know its a pain to swap backing plates, but some higher end cars need smaller pads for a professional finish.
Click to expand...

Only small LC pads I've found anywhere are 3+" CCS on Richard Lin's site (the Black WOW guy) at showcardetailing.com He has white and orange.

If AG carried LC 3" flat pads I'd buy every color of the rainbow. :xyxthumbs:

TL
 
mg6045 said:
very good question. why in the world dont they already have them ??

also, I would like to see them in low profile like the orange pad they offer.

In the meantime , this pad should hold you over for any serious correction purposes,

Lake Country 4 Inch Foam Pads Low Profile- Made of high quality foam, these pads have hook & loop backing all the way to the edges. The benefit of
Click to expand...


i asked for these a long time ago (in white, etc.) and apparently there isn't a demand for them, thus not stocking them. if you look around, B&S offers them in 4"...

TLMitchell said:
4" flats would be most welcome.
I use those and like 'em a lot!
TL
Click to expand...

agreed...
 
I often use a flat 4-inch pad to apply wax, sealants, by hand or DA.

My favourite is the pure white finishing pad for Cyclo.
It is very soft and being white you can see dirt very easily and pick them out before it scratch ur paint.
I believe they are made by Buff and Shine.
 
PPLd said:
I often use a flat 4-inch pad to apply wax, sealants, by hand or DA.

My favourite is the pure white finishing pad for Cyclo.
It is very soft and being white you can see dirt very easily and pick them out before it scratch ur paint.
I believe they are made by Buff and Shine.
Click to expand...

I like the Cyclo pads too especially with the polishing pal.

White-super soft foam
Blue-finishing pad (compare to LC black)
Green-polishing pad (maybe a tad less aggressive than LC white but much easier to clean)
Orange - similar to LC orange

autogeek_2163_116102219

Cyclo 4 Inch Premium Foam Pads fit on each head of your Cyclo Dual Head Orbital Polisher
 
You must log in or register to reply here.
Back
Top