PC7424xp VS Griots VS Shurhold VS Meguiar's G110.

supercharged

supercharged

New member
Joined
Mar 7, 2006
Messages
7,305
Reaction score
0
I will be getting a DA for a friend of mine. I upgraded to Flex VRG3401 and Makita rotary a few years ago and never looked back, but he is a newbie and something with a less learning curve. So far I'm leaning towards Griots because it's the most powerful one. Am I leaning in the right direction? Or will I be better off with PC 7424xp or other listed machines? Also, is Griots comes with a 6" backing plate that is replacable? Will it work with 5.5" pads?
Thanks in advance.
 
For sure Griot's or PC. Both have their pros and cons. Any DA backing plate should work with the Griot's.
 
shoeless89 said:
For sure Griot's or PC. Both have their pros and cons. Any DA backing plate should work with the Griot's.
Click to expand...

:iagree:Being more powerful and a lifetime warranty would sway me to get the Griot.
 
I have both the PC and GG 6".
They both have their pros and cons.
The Meguiars 5" MF DA kit works best with a PC7424xp.
I have heard of MF disc separation issues with the GG 6".
They are both good tools and either one is a good choice.

I still prefer the 5" backing plate & LC 5.5" flat pads with any DA.
The GG 6" (being more powerful) is a better correction machine IMHO
The PC with a 5.5" LC black flat pad does a great job with Menz PO85.
 
merlin said:
The GG 6" (being more powerful) is a better correction machine IMHO
The PC with a 5.5" LC black flat pad does a great job with Menz PO85.
Click to expand...

This is what I do as well. I used the Meg's MF cutting disc on the PCXP once and laughed hard. It responds so much better for me on the Griot's unit. If I can make it to Mike's class in January I hope to try out the Shurhold and Meg's units. :xyxthumbs:
 
This has to be one of the most asked questions on detailing forums anywhere. Kind of similar to the Ford vs Chevrolet debate that has gone on forever . IMO there is no correct answer but just our opinions reached from the experiences of using the various machines. Your thoughts on the Griots are well founded. Some question the reliability of that machine but I'm not in that camp. The Meguiars da is another great choice and is a bit smoother then the Griots. As for the new PC da , I have the older model and it has been a work horse forever with no complaints but has been dedicated for use with my smaller pads. So from someone that has the Griots , Meguiars and a PC my 1st choice would be the Griots 1st and Megs 2nd with a PC 3rd. Does a person need all of these ? Well I told the wife I did and thats my story and I'm sticking to it.
 
I purchased a DA buffer this year and I also had to choose amongst several great products. What won me over to the Griots was the life-time warranty and the extra power. Since I only detail my cars every 6 months a one year warranty would be meaningless and a life-time warranty priceless.
 
I have the Griots, Old version PC 7424 and Flex 3401. Without experience with the new PC, it is hard to give a definite answer. I would recommend the Griots for the beginner based on what I have.

I use the foam pads and MEg MF DA pads on my Griots. The only time I have delaminated them is when I am workign it way too hard. IF you let the machine, the polish and the pad do the work, it will do just fine.
 
You must log in or register to reply here.
Back
Top