Live Video Stream this Saturday and Sunday

Light said:
Looks like I saw the following being used:

Tornador Black Car Cleaning Gun

Pinnacle Tornador Car Cleaning Gun, detailing gun, air cleaning gun

Curious to get the classes' opinion if the black is worth the $70 premium over the white.
Click to expand...
From just seeing the black one in action I'm going to go with yes. I have two of the white ones an use then almost on a daily basis and there's been many times I have wished for just a bit more power. That's just my opinion an havent used the black yet.
 
I am really liking this live feed. I have my windows split so I can use the internet and still watch.

Is this a first time for live feeds? Or do you guys do this more often?
 
timaishu said:
I am really liking this live feed. I have my windows split so I can use the internet and still watch.

Is this a first time for live feeds? Or do you guys do this more often?
Click to expand...

we have did them in the past, Detail Fest, Classes
 
You guys should put a towel over the speaker so you dont have to worry about it.
 
Vid just cut out.. Is it over?

EDIT: Nevermind its back.
 
Alright all hope you all enjoyed the feed, be sure to check in tomorrow 12:30 to 1 when we do it again
 
Enjoyed watching the class today and plan on watching tomorrow as well!

It was good to see both the aztec and mytee extractors clean the cloth bench seat. The tornador seemed to work well with the tasks given it.

Thank you Autogeek for allowing others who could not make the trip watch for a bit!!!:)
 
silvermesa said:
Enjoyed watching the class today and plan on watching tomorrow as well!

It was good to see both the aztec and mytee extractors clean the cloth bench seat. The tornador seemed to work well with the tasks given it.

Thank you Autogeek for allowing others who could not make the trip watch for a bit!!!:)
Click to expand...

+1

Thanks AG!
 
Setting up for Day 2

Today we're going to use the Optimum and Meguiar's Microfiber Pads Systems on the Corvette with DA Polishers to remove the swirls and then seal the paint with Opti-Coat.

Here's the paint on the Vette before the class...

1DetailBootCamp004.jpg



Some kind of contaminants all over the paint, some have a rush color to them, should be perfect for the Iron-X demonstration.
1DetailBootCamp010.jpg


1DetailBootCamp011.jpg



Some kind of stain spots all over the paint...
1DetailBootCamp012.jpg




And of course swirls...
1DetailBootCamp013.jpg


1DetailBootCamp014.jpg



We ended Saturday by washing and claying the exterior and here's how it looks in the garage right now...

1DetailBootCamp071.jpg



So first thing today we'll finish this Corvette using the Meguiar's and the Optimum Microfiber pads and matching products.


Wetsanding, Cutting and Buffing
While the everyone cycles through working on the Corvette we'll also have dampsanding and rotary buffer stations set up on black practice hoods.

Ma15class004.jpg



We'll be using the same hood I used in this article and anyone that wants to try to create a swirl free finish using only a rotary buffer is welcome to try.

Hologram Free with a Rotary Buffer

HologramFree02.jpg




1949 Chevrolet Carryall Extreme Makeover
After the Vette is finished we tackle the 1949 Chevrolet Carryall using Pinnacle Polishes and Flex Polishers plus PC's, Megs and Griot's DA Polishers.

1DetailBootCamp035.jpg




All the paint on the Carryall looks like this...

1DetailBootCamp036.jpg




And sometime around noon today Yancy will be here to broadcast the class live!


Time to go set up for today's Detail Boot Camp Class!


:buffing:
 
You must log in or register to reply here.
Back
Top