The Post a Picture of Your Ride as it Sits Thread

John U said:
and decide if I’ll apply Gyeon Can Coat/Cure or BF AIO with Sio2 or 3D speed and Poxy.
Click to expand...

Nice and good looking behicle. We have a Sienna (great deal) now but we liked our previous Odyssey very much.

Isn’t that like comparing a bicycle to a motorcycle? CanCoat would last at least twice as long for not much more effort.
 
Stripped off the CQuartz 3.0 / CQuartz SiC combo with the Supa Beast and Menzerna 2400 then got a bit more out of it with Menzerna 3800 and a 21mm da.

Both steps done with the 5" Hex Logic red Ultra fine polishing pad

Coated with Kamikaze ISM 3.0

94f3088d1aeda42d08625e97885a467d.jpg


75e00965e92b304fbee27e0c6a0f196c.jpg


816b35d3216723d53ae3ee33db1a8bb0.jpg


1016134fa451fe95cb4158e1bd68aa66.jpg
 
98CayenneTA said:
Stripped off the CQuartz 3.0 / CQuartz SiC combo with the Supa Beast and Menzerna 2400 then got a bit more out of it with Menzerna 3800 and a 21mm da.

Both steps done with the 5" Hex Logic red Ultra fine polishing pad

Coated with Kamikaze ISM 3.0

94f3088d1aeda42d08625e97885a467d.jpg


75e00965e92b304fbee27e0c6a0f196c.jpg


816b35d3216723d53ae3ee33db1a8bb0.jpg


1016134fa451fe95cb4158e1bd68aa66.jpg
Click to expand...

How old was the 3.0/sic combo?

How does the ISM3 look in comparison?


Sent from my iPhone using Tapatalk
 
Coatingsarecrack said:
How old was the 3.0/sic combo?

How does the ISM3 look in comparison?


Sent from my iPhone using Tapatalk
Click to expand...

The CQuartz combo was about 4 months old.

The reason I stripped it was because I wanted something with better water sheeting properties with it being my daily driver and jet black.

Now imo CQuartz 3.0 is absolutley the best all around bang for the buck and a insanely good coating but Kamikaze coatings do sheet water quite a bit better but you're also going to pay for it.

I have Kamikaze Zipang on my Trans Am and I think that was $345 / 30ml but it beads and sheets like non other.

The Kamikaze ISM vs CQuartz combo looks wise I would say I love the look of both but if I had to try and describe it I would say the CQuartz looks like there is a actual sheet of "glass" on your paint and gives a very "sharp" look where as the ISM kinda looks like the base, clear and coating are all one layer. Just a dark, deep, rich glossy smooth look if that makes sense.
 
We're getting new fuel pumps installed so I've gotta park at my old spot. First shot of the EN at the old spot
29f0f146434550e63dfd49df4f17778c.jpg


Sent from my SM-G991U using Tapatalk
 
I think I parked in the wrong spot, overhead pipes made me an easy target. DFB will appreciate what I parked next to though. Shame it was so dirty.
d52d4201433607ca71c4a3c2fcb8ec0b.jpg
05ee6adcb1e85fefde1baeedc4149775.jpg


Sent from my motorola edge 20 fusion using Tapatalk
 
Big Dave you have a link for the DRL Day Time Running Lights that you got :D
 
Drove these two this weekend.
db645db326370f19bbf78bea48237ca3.jpg
c3d2cd80438924cf37e631f5fca8b34e.jpg


Sent from my moto g power (2021) using Tapatalk
 
Coatingsarecrack said:
Is the Teminator stock under the hood?

And do you prefer driving it or the Shelby?


Sent from my iPhone using Tapatalk
Click to expand...
No, it has a tvs blower, 21 psi, headers, return fuel system and E85.

The 350 is new to me so I've been driving it more lately. Both two different animals, but the 350 is much easier to drive and more comfortable.
eb6664be0e62be33536a34d10af152a0.jpg


Sent from my moto g power (2021) using Tapatalk
 
View attachment 75438
2018 Yamaha Xmax 300
My x2 m35i is somewhere Above but this is what I use most of the time during the gas crisis. Bike is protected with Gyeon Cancoat and a topper of elixir. All the running gear is coated with Gyeon wet coat.
 
Drove these two this morning.
f3b90a8faa3572ab77f498a37b6ece7b.jpg


Sent from my moto g power (2021) using Tapatalk
dd9326539754680f368bb4860fd7010b.jpg
 
Bdubbs said:
Drove these two this morning.
f3b90a8faa3572ab77f498a37b6ece7b.jpg


Sent from my moto g power (2021) using Tapatalk
dd9326539754680f368bb4860fd7010b.jpg
Click to expand...


Sheesh, no only do you stick the knife in last weekend, you have to twist it a bit too. :D
Let me guess, your next post will be of the 7up out for a drive.
Coming from another Mustang guy, I'm jealous of your (smallish) collection.
 
You must log in or register to reply here.
Back
Top