Menzerna Chart

I must disagree with you there. Unless it's G Techniq, there is nothing that compares to Menzerna
Have been using Menzerna since 04 and tried over fifty brands of polishes as well (still use others as well) and the end result with them is unmatched.

106FF and RE5 stand alone.
My shop must deliver the ultimate finish so I will follow on after 106 with a glaze or a paint sealant pre treatment product to get it even wetter

System one is for body shops who want to do it fast.
When you take your time and with up to six different pads on a really shagged paint finish, the end result is a completely insane flawless finish that won't wash away and bring back the swirls
 
Mr dream machine like your comments mate,we used PO91L and POS34A and PO106FF and found them just OK.We still stand with our wager that we'll go toe to toe with any crap swirlies on a car , you are allowed ONE POLISH and any TWO PADS and after the job we"LL rub in down with Prepsol and we"LL see who has the best Finish we'll even get an outside paint shop guy to wet sand 1500 grit on the job first. any takers. Buy the way Toyota America did the same test and invited all the top manufacturers along , Mag,mothers turtle etc and they all went home with there tales between there legs. New System One was the only one standing.
 
what does ceramic clear mean?? my trucks have a clear cote thats all i know
 
is menzera polishins just ment for hard clearcote s?after reading alittle more it seems like its ment for hard clear cots . can it be used on any paint system? thanks
 
Any type clear whatsoever.

Pete, I agree about meg's, turtle wax etc and there's no doubt that system one is a great idea and obviously works well.
If we were to meet, I'd go with G Techniq. The newest technology in polishing which only removes the tiniest amount of clear and cuts from 1000 to 3000 grit and with two pads, your all done.

So saying that you would rub down with prepsol, are you stating that you think menzerna fills in marks. It doesn't. once they are gone, that's it, no coming back after washing or alcohol wipedown.



Hey that would be great. I like corvette's alot.
 
Thanks for the info dream always like to learn something new mate tell me more about G techniq,We are currently working with a chemist in the states who has sent us a sample of a new nano tech polish,cuts 1000 grit out does not dry out quickly so you can push and pull the polish around a lot longer and does not powder like alot of the others do and it final buffs to a gorgeous deep gloss with a euro white pad on a rotex.Again one polish and wool/foam combo. I love where the industry is heading with smart chemist listening to the guys and girls at the coal face.cheers pete
 
Menzerna Power gloss finish out to lsp ready also! Its amazing ;)
 
sounds great. it's not david at optimum polymer technologies?
Is the euro pad a malco branded one, I haven't heard of Euro before

I am waiting for the sydney based dealer to finish all the red tape with creating the business, getting approval for importation etc etc
Once that's done, I'll be sourcing a case of it and hopefully replace some of the polishes that I am using.
It sounds to me like a new type of chemical polish which unlike the rest, actually has some big balls.

yes short working time and dust is not very nice. PO91L certainly does that whereas 3.01 does not.
I was thinking of adding some glycerin to the 91L and see if that will fix the problem
 
Mr Dream sorry mate Euro pads as in imported from europe,where finding pads from the states do a nice job but the technology from europe will blow your mind especially in the final finish buff pads they have a pink and a white one.When we get some more samples from the states of the new nano polish we'll send some over for you.cheers pete
 
Yeah I know what you mean.
lake country pads are what I use at the moment and the foam they use comes from europe too.
 
i found this on a forum from the U.K. for ranking MENZ products

Menzerna Power Gloss (10/10)
Menzerna Intensive Polish PO85RD3.02 (7/10)
Menzerna Intensive Polish (5/10)
Menzerna Final Finish Polish (PO106FF) (4/10)
Menzerna Final Polish II (3/10)
Menzerna Final Finish Polish PO85RD (2/10)
Menzerna One Step Acrylic Jacket (1/10)
Menzerna Finishing Touch Glaze (0/10)
 
detailgod said:
i found this on a forum from the U.K. for ranking MENZ products

Menzerna Power Gloss (10/10)
Menzerna Intensive Polish PO85RD3.02 (7/10)
Menzerna Intensive Polish (5/10)
Menzerna Final Finish Polish (PO106FF) (4/10)
Menzerna Final Polish II (3/10)
Menzerna Final Finish Polish PO85RD (2/10)
Menzerna One Step Acrylic Jacket (1/10)
Menzerna Finishing Touch Glaze (0/10)
Click to expand...
Rating the cut or rating the overall effectiveness?
 
Hmm. sounds like he didn't work the menzerna in enough. 106FF always leaves a super fresh mirror like finish that's squeaky clean

So is this the new system one your reffering too
Very exciting
 
richy said:
Al,
What about that Italian gel polish that you had mentioned (elsewhere) that is supposed to be the cat's a$$ on top of Menz..have you heard anymore about that?
Click to expand...

Sounds like AGK Potenza P800 and P1500. Menzerna is IMO better and are much easier to work with. But AGK is not bad at all. I just prefere Menzerna.
 
porta said:
Sounds like AGK Potenza P800 and P1500. Menzerna is IMO better and are much easier to work with. But AGK is not bad at all. I just prefere Menzerna.
Click to expand...


The AGK does not seem like the product mentioned to me....but not sure....the stuff I was told about was a gel....I will have to ask Daragh about it..he was the one who told me...

I just looked at the AGK site..and its not the same site I was linked to awhile ago....

AL
 
There's an italian mob called Gelson who make polishes, however some contain fillers and I didn't like the finish and it didn't last long.
 
I am pretty sure it´s AGK if Daragh told Al. Beacuse Daragh told me that he was thinking of AGK. P800 is a very gritty compound! But I do love the sealant.

Back on topic, I am still waiting for my bottle of PO106FA. My samples are running low :(
 
You must log in or register to reply here.
Back
Top