I completely agree the cost of buying this product is not worth it compared to the method we all know best. However what I'm after is what the key elements are in the can that allowed me to get better results when sprayed on a oxidized un-sanded headlight vs the spar/spirits method. It was truly...
lol alright I definitely couldn't wait until the junkyard and just sprayed the oxidized side of one my demo lights and it somehow looks 100 times better than the side I spent 20 minutes on and I didn't even sand first, only cleaned with alcohol, this just isn't fair.. if you know more about...
Has anybody heard of the Light Right kit before? My neighbor works at Toyota and gave me the kit Toyota uses to do all of their restorations. From what I was told they only wetsand with 600 grit then spray on the UV coating which comes in a can and hardens in 10-15 min with sunlight or UV...
I've experienced bubbles when using the 60/40 mixture as well, however never while using the 50/50 because the mixtures viscosity is lower. When the bubbles do appear it's always just after applying with the scott towel and will go away if left to self level. However if your doing this in direct...
Any thoughts on wrapping the shop towel with a small piece of silk to provide more uniform application and less initial streaking when applying the spar mix? Im going to be trying this method later in the week, but wanted to first see if anyone else has tried something similar.
Hey everyone, new to the scene of headlight restorations as well. Finally finished reading all 656 posts! I've been going with 3m's 3 inch unigrit disks 500/800 dry then 1500 wet followed by 60/40 spar urethane/mineral spirits. The only question I have is do you guys use 1 disk per headlight or...