Recent content by Pray4snow78

Would it be easier to buy the starter kit or go al a carte??? And what would i need for basic maintenance no heavy work

Thanks for the info, i think im about to go broke!!!

I had a quick question, MF? And i see optimum in the store sec but no mf pads?

Thanks for the advice

removed all the badges with dental floss and goo-gone, then clayed and polished, unless you do, someday you will see exactly what and where the emblems were.

Took a pic to clarify, im narrowing it down to arms speed and too low a speed setting on polisher?

And a DA just isnt in the budget right now, hopefully soon as it seems to be the tool of choice today, thanks for the info fellas

Im using an older porter cable, it doesnt have an rpm indicator on it, and being new i set it to low, which im now reading is bad. The finished product is actually really blemish free and leaves a really glossy finish. Except in the direct sunlight.

I have a 97 528 dark blue with a decent amount of oxidation and light scratches. I start by claying after washing, obviously!. I only have 3M perfect 3 step. I already bought it so thats what im stuck with. Im not sure which step left the holograms on my truck, so should i start with the...

Thanks for the info fellas

I did use a rotary, porter cable, older model. On the lowest speed possible with sprits of water to lube things up. Im the original owner and the paint was in good shape prior, just scratches and sun-fade, my feeling is the rubbing compound wasn't necessary. The 3M steps are 1- rubbing, 2-...

I have an 05 Ram, atlantic blue with 86k miles. No dents, clean paint. So i started with a claying, then went with 3M perfect-it 3 step. Im not sure if i needed to start with rubbing compound. Thats probably what caused the holograms, im not sure. The problem is the paint looks absolutely...

This Andy from Long Island. New to detailing and doing really well as a hobby, i have an 05 dodge ram with 86k miles on it and the finish is prize winning.