Search results

75% overlap when painting metallics.

merlo is the color. if it is soft ill do it by hand. i have megs 105 and 205 can get others. i have megs g100 and all megs and lake country 5.5 pads have griot's 4 inch polisher and all pads.

the swirls are noticeable in certin light merlo color bike. was thinking megs swirl remover 2.0 or megs 205 by hand or by da with polishing pad. my bad... my friend has a road glide.

is the paint on this motor cycle hard or soft. there is swirls on the fiberglass or plastic saddle bags and need to be buffed out.

i have 1 and i put a mf bonnet on it and use it to take off wax after it dries.

evrything on a car runs on 12 volts. the 9 volt is just to keep the memory on everything alive. if you open the door or trunk the 9 volt will die within 5 seconds. i would go the charger route.

hard to work with yes. buffing it will marr the paint then it will heal. great to own yes it is as the owner dont have to worry about shallow scratches just he gash in the paint.

porsche has that paint too.

yes it is a great company. they usually charge 350.00 a vehicle around chicago. go to the dealers around your neiborhood and you will see them fixing cars all the time.

wesely's bleach white $4.00 a bottle use on a dry tire and watch the mud (brown) come off. i buy a few every time i need some.

should be one as there is none on the internet at all.

ive been told that it is contaminents in the paint gun or air line mostly oil got in the paint. so i am going to repaint my car soon.

i have the same thing on my grand national and people say it is from buffing out the paint i got most of them out by wetsanding and repaint a spot. i did just paint my buick last year and let the paint sit the past winter. then wetsanded and buffed in the spring then the spots showed up after...

the car wil get hazy when to many coats of wax is applied. clay barring will remove wax and remove the hazing

i like the older whale tails

looks like the old black and decker car vacuum but uses steam. its a great carpet and seat cleaner i have a rear seat from 1984 that hasent been cleaned since then. might get one for this. wonder how it would work on leather seats i have a 1984 buick grand national.

and speed 6 is too fast. try 4 or 5 for paint correction and speed 3 for wax application. you will get better results with a slower speed. and remember ablut 10 lbs of downward force on the machine, and keep looking that the pad is spinning. if it is not spinning then its not doin anything.

do you need to change the weight inside for the 4 inch pads?

speed 6 is to fast try 4 or 5 i used the orange lc pad and 105 and my sanding marks came out.

i just got my 849 and i like it alot. i noticed on the speed wheel it clicks some then it showes 1400 i know to use the slower speed 1000 to 1200 but how many clicks to turn for those speeds... i looked at the download and it didnt say anything about it. looking for videos on technique and didnt...