Search results

BTW, how long do I have to wait to wet sand the newly repaired scratch job, it had to be filled with bondo then primed and base coated, then clear sprayed. Or would I need to wet sand it, fyi. I already bought the things to wet sand.

I am doing a scratch repair, I have seen lots of videos on how to spray, and I got different distances. That's why I am asking this forum. What would be the correct distance to spray paint and the clear?

Does anyone know if the touch up spray paint like slate metallic they sell on line, have metal flakes in it? I just ordered some, and they went get back to me, not yet anyway.

I have a small but deep scratch on my hood, would anyone know about how much a body shop would charge me, it's about 3/8 inch long and about 1/16 inch wide, down to the metal.

BTW, I am hoping this will do a fair to good fix. Aerosol sandable acrylic lacquer primer. Aerosol high gloss clear coat. And aerosol spray paint. Since I think it went to the metal, its deep. Any feedback will be helpful.

The garage to just came down on the front tip of my hood, it's a small but bad scratch. I think it's down to past all the clear and on to the metal, I will try to show pics, ? Is can I wet sand it out with touch up

Does as anyone know who makes a detailing bag to fit the torq22d?

I was thinking like the polisher enhancer, finishing glaze, then the sealant 3.0, or would I need the enhancer?

I have a 2018 toyota Corolla and I want to get some Wolfgang con our series products to detail the car, so what order do I go about this, Iike the polish enhancer, a d ghe 3.0 sealant , wax ect... I need to know what to get and what order, the paint is new no scratches, I always shampoo, then...

I have a 2018 toyota Corolla, and the paint is in new condition, so on the wolfgang concours series, I am wondering what to get to detail the car, and should I get the wax, when they have the deep gloss sealant and polish?

I just compared the rupes lhr21 mark2, against the torq22d, I ran them together and one at a time. My choice for less noise and vibration was for the torq22d, to me there was a significant difference in noise and vibration, so I decided to send back the rupes, and save some money, since I just...

Does anyone know where I can get instructions on how to tear down the torq fx10, I want to replace the grease on the gears.

I just got a new rupes lhr 21 mark 2, when I turn it on there's a grinding noise every 2 or 3 seconds, is this normal?

Hello again, I was using chemical guys products with their torq machines, but now I have a rupes mark2 machine, and would l Iike to change products on polishes,glazes, and sealants and waxes, my car is a 2018, months old no scratches that I can see,, so if I choose like rupes products , what...

Is the rupes HG 3000 hyper gloss, is this like a glaze? Or do they have glazes, and would wolfgang products work well with rupes mark2 and their pads?

On the washer mod, on the mark2s, and the dielectric grease on the shroud, would the dielectric grease spin the backing plate as freely as with the washer mod?

Greasing mark2 backing plate? I am new on here so I have lots of ?s, lol. So here's another, the grease to grease the backing plate on the rupes lhr21 mark2, they say dielectric grease, I have connector grease for car sparkplug connectors, it says its dielectric, then it says its 100% pure...

I had a torq torq 22dand it was recommended to remove the factory grease on the main gear and replace it with any auto store grease which would be better then the factory grease they put in, I was wondering would I need to sometime down the road to replace the gear grease on the rupes lhr21...

Would the maroon pad be ok for like a all in one polished such as the one chemical guys carry, I have a whole bottle of lol. So I trying to find a pad to use it on, other ghen the hex.

I am getting the mark 2 rupes polisher, the thing is I have lots of 5.5 inch and 6.5 inch chemical guys hex logic pads , I normally am doing just the final polishing and applying like glaze, sealant, and then wax, would these pads hold up on the rupes lhr21 mark2 polisher?