1 Step Product?

O

outlander

New member
Joined
Mar 29, 2008
Messages
139
Reaction score
0
Hi guys looking for a 1 step product to apply to my wife 2007 black toyota camry. It has some swirls but not too bad. I have Menzerna IP and FP. But since it is getting cold here in Pittsburgh I"am looking towards a 1 step product followed by a wax. Have A PC with orange, white, black red pads. What do you guys recommend?Feed back please
 
I haven't tried it just yet, but I am looking forward to trying the XMT 360. You might want to read some on the forum about - lots of great reviews.

It seems to cover exactly what you are wanting to do, and was made for machine application. The white pad would be perfect.

DLB
 
Power finish 203 on a soft green LC pad works well. So does Wolfgang TSR 3.0. If the swirls are light that will work.
 
outlander said:
I"am looking towards a 1 step product followed by a wax.
Click to expand...
Just to make sure. Your looking for a 1-step polish and then wax? Or your looking for a all-in-one product like Dodo need for speed, and XMT 360?
 
I have been checking out poorboys polish/sealant they have. I am interested in that.
 
The Pinnacle XMT 360 or the Menzerna Super Finish (Nano) fallowed by a carnauba wax. I would recommend the Pinnacle Souveran Paste Wax or the Wolfgang Fuzion Estate Wax for your LSP.
 
Last edited:
have heard some people have gotten a good amount of correction out of M205. and it finishes LSP ready
 
PC with orange pad XMT360. It would be faster if you had a yellow pad, it has more cut.
 
Here is a Lexus I used 360 on. It works very nice....
http://www.autogeekonline.net/forum/show-n-shine/20901-09-lexus-rx.html
Before XMT 360
2009_0927090004.jpg

After XMT 360
2009_0927090010.jpg
 
sparkie said:
PC with orange pad XMT360. It would be faster if you had a yellow pad, it has more cut.
Click to expand...
I would think if you had to go to a yellow pad the cars paint needs a good amount of correction and i would step up too wool before using a yellow pad???
 
evilwrx said:
That looks great!! What pad did you use to obtain these results? Did you finish this with an lsp or just use XMT360 as it is a sealant?

I have used XMT 360 with a white pad and it finished out great.
Click to expand...
Paint Polishes XMT360 Polish yellow pad Griots DA setting 5 and 6.
 
You must log in or register to reply here.
Back
Top