14 Camaro Engine Detail Help

TuxedoTaurus

TuxedoTaurus

New member
Joined
May 17, 2014
Messages
554
Reaction score
0
A guy in my apartment complex stopped me while dressing my tires, and asked me to detail his 14 Camaro. It has 2500 miles on it and in great shape, just very minor swirls.

Anyway, he wants the engine compartment detailed. Is there anything out of the norm to cover up, besides the alternator and battery?

Thanks
 
It's probably completely covered in plastic like most engines today.
 
This is what I do but you are in a complex so maybe cant or dont have a PW.

I spray the entire engine down with a degreaser such as Meguiars Super Degreaser or 3D Yellow Degreaser or LA's Totally awesome all usually diluted to 10:1. Then spray it off with a power washer. I dont specifically stay completely away from the Alt/Electrical components but I do spray them MUCH less than other things.

I usually keep the PW about 12-15 inches away from the surface Im spraying as to not force too much water into places it should be.


I have had MUCH GOOD luck doing this for years and years. If you have a hose and nozzle then use the finest mist you have available = less water per minute.
 
dcjredline said:
This is what I do but you are in a complex so maybe cant or dont have a PW.

I spray the entire engine down with a degreaser such as Meguiars Super Degreaser or 3D Yellow Degreaser or LA's Totally awesome all usually diluted to 10:1. Then spray it off with a power washer. I dont specifically stay completely away from the Alt/Electrical components but I do spray them MUCH less than other things.

I usually keep the PW about 12-15 inches away from the surface Im spraying as to not force too much water into places it should be.


I have had MUCH GOOD luck doing this for years and years. If you have a hose and nozzle then use the finest mist you have available = less water per minute.
Click to expand...

Thanks, I do have a Dewalt PW but only use on exterior I will use a regular hose. I do this mobile or at my in-laws place. This will be done in the owners garage(just moved back in his house).

The engine is not really grimmey, just dusty.
 
I wouldn't PW an engine, I'm just saying. I know water will get into the engine compartment, I mean you DO drive in the rain. But a PW, I wound to go there!!!

Spray it down with APC, agitate, hose it off, then blow it out... It's a new car with 2500 miles, hell just a hose off my cut it!

GOOD LUCK!!
 
Well, since you are actually going to have to clean it, I have a setting on my hose nozzle that is "mist" so I would mist the engine, spray apc, use a soft brush to loosen up the dirt, then "mist" again.
 
With a car that new.....and that few of miles 0NR is your friend!
 
I'm gonna try ONR first, then go traditional if it doesn't cut it.

I just want to make sure that I don't get any surprises by missing something I need to cover.
 
You must log in or register to reply here.
Back
Top