Fiery Goose
New member
- Jun 18, 2015
- 6
- 0
Hey everyone! Just wanted to post some pics from my last detail job. My buddy's truck was a chore to work on but I really enjoyed it. The sides had been repainted since 1990 so they had a coat of clear applied but the roof and hood were still the original single stage paint. I followed the steps that Mike Phillips used on a single stage detail that he had posted on autotraderclassics.com.
The hood and roof of this truck was severely oxidized and using the Meguiars #7 Show Car Glaze did the trick. I applied 4 coats to the entire truck. The first coat I let sit for 14 hours before I buffed it off. The truck's maroon color really popped and looked much deeper after the detail. I did it all by hand because I didn't want to risk messing up the paint with my PC DA polisher. I was happy with the results and I learned a lot.
Thanks for taking the time to read this post and view the pics. If you have any questions on what I did/used on the project I would love to share them. Thanks again!
-Adam
The hood and roof of this truck was severely oxidized and using the Meguiars #7 Show Car Glaze did the trick. I applied 4 coats to the entire truck. The first coat I let sit for 14 hours before I buffed it off. The truck's maroon color really popped and looked much deeper after the detail. I did it all by hand because I didn't want to risk messing up the paint with my PC DA polisher. I was happy with the results and I learned a lot.
Thanks for taking the time to read this post and view the pics. If you have any questions on what I did/used on the project I would love to share them. Thanks again!
-Adam