Richie Carbone
New member
- Apr 8, 2011
- 36
- 0
My client recently acquired this 2006 Bentley GT and wanted it dialed in to perfection.
The car came in with the stock wheels as a set of HREs were on order.
It was originally a Chicago car and it showed by the amount of bonded contaminants present on the finish.
As it was dropped off.
The lower grilles were shot so replacements were ordered.
Hood defects.
Looks like the old rocks in a bottle compound was used here.
Readings were healthy.
Hood 50/50
LED.
Rear deck lid and air brake before.
This beauty needed to be wet sanded.
Readings checked out.
Sanded.
More defects.
This canyon also needed a little sanding to remove completely.
Again the readings were good.
Removed.
Finished down.
Tail lights were in need of some attention as well.
The car came in with the stock wheels as a set of HREs were on order.
It was originally a Chicago car and it showed by the amount of bonded contaminants present on the finish.
As it was dropped off.
The lower grilles were shot so replacements were ordered.
Hood defects.
Looks like the old rocks in a bottle compound was used here.
Readings were healthy.
Hood 50/50
LED.
Rear deck lid and air brake before.
This beauty needed to be wet sanded.
Readings checked out.
Sanded.
More defects.
This canyon also needed a little sanding to remove completely.
Again the readings were good.
Removed.
Finished down.
Tail lights were in need of some attention as well.
rops:
