Chicago Tommy
New member
- Sep 9, 2013
- 130
- 0
Wow. This one kicked my ass. Black 2009 Chevy Avalanche that had only been run though gas station wash racks since 2009. Take a lesson here guys, wash racks are bad. Think about every time you've driven your excessively muddy vehicle in to one, all that dirt is now on the equipment. That equipment is rarely cleaned, if ever. Now the next person through the rack is having their paint abraded by your dirt. Never use a wash rack on a vehicle you at all care about.
I started with a wash. Good god did it need a wash. It's a work truck, and sees daily duty come rain or shine. Meguiar's Deep Crystal Car Wash was the soap of choice. We're removing dirt, and setting the stage here. Fancy car wash soaps with wax and other "extras" aren't needed.
So now we have a good general overview of the current dirt situation. Over an hour was spent on the wheel wells, wheels and tires.
After clay bar-ing it down, and getting it inside, I took a few detail pics to show the amount of swirls and damage that would be corrected. These are the hood of the truck.
And this was a vertical panel.
Here is a 50/50 shot of the driver rear door and the quarter panel. The door on the left has not been compounded. The quarter panel on the right has been compounded. You can see the spiderweb swirls around the light, and clarity on the right side.
More close up of defect removal. Swirls are 90-95% GONE.
Had some big scratches and scuffs on the passenger front fender from someone jumping on the truck with a belt on. This was a significant issue for the owner, and he was amazed that I had removed it.
Remember that hood that looked completely trashed with no reflectivity?
Unfortunately it was pouring rain when I got this one done, so I didn't get any overall beauty shots. Best I could do in my garage with this HUGE truck taking up all the space. Wheels were recleaned, Meguiar's Ultimate Tire Gel was applied to the tires, and a protectant was applied to the inner wheel wells. Meguiar's Black Wax was used on the paint, and Meguiar's Ultimate Black Plastic Restorer was applied to the plastic surfaces.
I started with a wash. Good god did it need a wash. It's a work truck, and sees daily duty come rain or shine. Meguiar's Deep Crystal Car Wash was the soap of choice. We're removing dirt, and setting the stage here. Fancy car wash soaps with wax and other "extras" aren't needed.
So now we have a good general overview of the current dirt situation. Over an hour was spent on the wheel wells, wheels and tires.
After clay bar-ing it down, and getting it inside, I took a few detail pics to show the amount of swirls and damage that would be corrected. These are the hood of the truck.
And this was a vertical panel.
Here is a 50/50 shot of the driver rear door and the quarter panel. The door on the left has not been compounded. The quarter panel on the right has been compounded. You can see the spiderweb swirls around the light, and clarity on the right side.
More close up of defect removal. Swirls are 90-95% GONE.
Had some big scratches and scuffs on the passenger front fender from someone jumping on the truck with a belt on. This was a significant issue for the owner, and he was amazed that I had removed it.
Remember that hood that looked completely trashed with no reflectivity?
Unfortunately it was pouring rain when I got this one done, so I didn't get any overall beauty shots. Best I could do in my garage with this HUGE truck taking up all the space. Wheels were recleaned, Meguiar's Ultimate Tire Gel was applied to the tires, and a protectant was applied to the inner wheel wells. Meguiar's Black Wax was used on the paint, and Meguiar's Ultimate Black Plastic Restorer was applied to the plastic surfaces.
