Hi all,
Picked up a 2009 Suzuki SV650S a month or so ago and today was the day that it got a detail! I was lucky enough to find the bike locally. It's a 2009 with 4200 miles on it and has never been dropped or wrecked.
The paint was in fairly good shape because of the low miles but it definitely had some swirls, scratches, sticker residue and oxidation.
Before pics:
Some slight swirls and such


Sticker residue from PO:
Untitled by Chris Merritt, on Flickr
Started off with a foam bath with CG Honeydew

I was unable to get many pictures of the actual detailing process but I did the following:
-Removed front fender to gain access to the whole panel
-Clayed the bike with Nanoskin Fine Pad and Nanoskin Glide
-Compounded the bike with Menzerna FG400 and an orange LC hybrid pad. Only had to do a few passes since it wasn't bad but there were some spots that needed more than a polish could handle
-Polished with Blackfire SRC Finishing Polish and LC white hybrid pad
-Wiped the bike down with Wolfgang Perfekt Paint Prep
-Coated with Wolfgang Uber Ceramic Coating
-Polished exhaust up with CG metal polish
Went over the plastic windscreen briefly. It was pretty trashed and I only did the outside so swirls were still present on the inside of it.


After shots:

Some out of the sunlight





Next project is to take the wheels off and brake rotors off and clean and coat the wheels. However, that will be a project for another weekend!
Thanks for looking!
Picked up a 2009 Suzuki SV650S a month or so ago and today was the day that it got a detail! I was lucky enough to find the bike locally. It's a 2009 with 4200 miles on it and has never been dropped or wrecked.
The paint was in fairly good shape because of the low miles but it definitely had some swirls, scratches, sticker residue and oxidation.
Before pics:
Some slight swirls and such


Sticker residue from PO:

Started off with a foam bath with CG Honeydew

I was unable to get many pictures of the actual detailing process but I did the following:
-Removed front fender to gain access to the whole panel
-Clayed the bike with Nanoskin Fine Pad and Nanoskin Glide
-Compounded the bike with Menzerna FG400 and an orange LC hybrid pad. Only had to do a few passes since it wasn't bad but there were some spots that needed more than a polish could handle
-Polished with Blackfire SRC Finishing Polish and LC white hybrid pad
-Wiped the bike down with Wolfgang Perfekt Paint Prep
-Coated with Wolfgang Uber Ceramic Coating
-Polished exhaust up with CG metal polish
Went over the plastic windscreen briefly. It was pretty trashed and I only did the outside so swirls were still present on the inside of it.


After shots:



Some out of the sunlight





Next project is to take the wheels off and brake rotors off and clean and coat the wheels. However, that will be a project for another weekend!
Thanks for looking!