Finally had a chance to go over the Range Rover this weekend. Process was as follows:
-Rinse
-washed vehicle with a foam gun (chemical guys Maxi Suds II)
-Rinsed, but didn't dry
-Iron X
-Re-foamed with Iron X still on the vehicle, and agitated with wash mitt
-Rinsed the Vehicle
-Foamed vehicle again, and rubbed out the vehicle with Griot's Fine Grade Surface Prep Mitt
-Rinse
-Dry
-Sealed with Blackfire Wet Diamond All Surface Paint Protection (1st coat was applied Saturday, applied 2nd coat Sunday.
-Applied Blackfire Black Ice Hybrid Montan Wax today.
-Tires are coated with 3 coats of Turtle Wax Endure Shine
-Solution Finish was used on lower trim areas and front Windshield cowl.
Decided not to polish right now since I have no place to use my GG 6". Sorry no before pics
-Rinse
-washed vehicle with a foam gun (chemical guys Maxi Suds II)
-Rinsed, but didn't dry
-Iron X
-Re-foamed with Iron X still on the vehicle, and agitated with wash mitt
-Rinsed the Vehicle
-Foamed vehicle again, and rubbed out the vehicle with Griot's Fine Grade Surface Prep Mitt
-Rinse
-Dry
-Sealed with Blackfire Wet Diamond All Surface Paint Protection (1st coat was applied Saturday, applied 2nd coat Sunday.
-Applied Blackfire Black Ice Hybrid Montan Wax today.
-Tires are coated with 3 coats of Turtle Wax Endure Shine
-Solution Finish was used on lower trim areas and front Windshield cowl.
Decided not to polish right now since I have no place to use my GG 6". Sorry no before pics
