Hey guys! A repeat customer of mine called saying that they needed a couple of their new 2017 Evora 400 2+2’s polished due to some left over sanding marks from the factory. The last of the three was a solid blue. After doing some test spots, I concluded that the paint was pretty soft so went ahead and decided to use Meguiar’s M100 with a Flex & a tangerine hybrid pad.
Process:
Wash – ONR
Wheels – Meguiar’s Wheel Brightener
Tires – Cleaned with Meguiar’s super degreaser and dressed with Meguiar’s All Season Dressing
Paint Prep – Wax & Grease Remover, no clay bar was needed
Paint Correction – Meguiar’s M100 on the Flex 3401 with a LC tangerine hybrid pad(surprised on how it finished LSP ready). Dewalt rotary with 3 inch wool pads to remove deeper sanding marks around emblem.
Glass – ONR soaked towel and just buffed off with a clean MF
Sealant- Meguiar’s X-Press Spray Wax, since this was just somewhat of a new car prep no actual sealant was required since cars had been sold
Process Pics:
All taped up.
AFTER:
Thank you for viewing!
Process:
Wash – ONR
Wheels – Meguiar’s Wheel Brightener
Tires – Cleaned with Meguiar’s super degreaser and dressed with Meguiar’s All Season Dressing
Paint Prep – Wax & Grease Remover, no clay bar was needed
Paint Correction – Meguiar’s M100 on the Flex 3401 with a LC tangerine hybrid pad(surprised on how it finished LSP ready). Dewalt rotary with 3 inch wool pads to remove deeper sanding marks around emblem.
Glass – ONR soaked towel and just buffed off with a clean MF
Sealant- Meguiar’s X-Press Spray Wax, since this was just somewhat of a new car prep no actual sealant was required since cars had been sold
Process Pics:
All taped up.
AFTER:
Thank you for viewing!
