3M Ultrafina

[Hades02]

I see lots of folks mentioning this product. I went
and bought it today but it says Ultrafine on it. The
number is 06068. Is this the same stuff?

 

[Matt S.]

Yes, Ultrafine = Ultrafina, just different names for different countries/languages.

 

[Hades02]

Thank you. Just making sure because it seems everyone
here calls it Ultrafina and it is not cheap stuff.

 

[Harleyguy]

Thank you. Just making sure because it seems everyone
here calls it Ultrafina and it is not cheap stuff.

It is well worth the money.Make sure you remove it while it is still wet.Goes on wet off wet.

 

[Hades02]

Thanks HarleyGuy,

I now have Megs 105, Menz Micro Finish and 3M Ultrafina.

 

[loudog2]

Are you using it with a rotary?

 

[RaskyR1]

UF is some good stuff! Be sure to get the matching pads though....I picked up the UK ones too.

 

[Rsurfer]

UF is some good stuff! Be sure to get the matching pads though....I picked up the UK ones too.

Will it not work with LC ccs pads? If not, what happens, cake on product, grabbing, what??

 

[ASPHALT ROCKET]

It works just fine with the ccs pads, no need to worry Ron.

 

[Rsurfer]

It works just fine with the ccs pads, no need to worry Ron.

Thanks, everyone is recommending that it should be removed when wet. Never heard of a polish that needed to be removed when wet. Hope it has a lot of oils in it to give it some working time.

 

[Harleyguy]

Thanks, everyone is recommending that it should be removed when wet. Never heard of a polish that needed to be removed when wet. Hope it has a lot of oils in it to give it some working time.

Yep this one goes on wet and off wet .It has a oil like flim to it.Not sure if this is just for Megs products but when Mike phillips was teaching his class every product should come off while still wet except for there wax.i used UF with my CCS pads gray one .I also have the UK blue one which i haven't tried yet.The uk ones are just smaller then the US one's

 

[ASPHALT ROCKET]

Yes it is a wet polish, remove it when it is still wet. Also the way you tell if you are using the proper amount is that you will see the pad sling oil, this tells you that you are using the proper amount. It does have a decent work time.

 

[Rsurfer]

Yes it is a wet polish, remove it when it is still wet. Also the way you tell if you are using the proper amount is that you will see the pad sling oil, this tells you that you are using the proper amount. It does have a decent work time.

So how do you know when the polish has broken down and is it non-diminishing or diminishing? Thanks I'm really looking forward to see freakin oil splashing all over the place.

 

[ASPHALT ROCKET]

So how do you know when the polish has broken down and is it non-diminishing or diminishing? Thanks I'm really looking forward to see freakin oil splashing all over the place.

Diminishing, it will go nice and transparent. The oil is a beautiful site and it is very easy to remove, much easier than Menzerna.

 

[Hades02]

I am using LC CCS pads on a Flex. Will try my new stuff tomorrow if it doesn't rain. Just got my next order in so this week I have received the Megs 105, Menz Micro Polish, Duragloss 901, Wolfgang DGPS 3.0, Amazing Roll Off, PB Trim Restorer, PB White Diamond, DP MaxWax,
XMT 180, 3M Ultrafina and Forever Black. I want to thank AG for the samples of other stuff to try.

 

[nitro78]

I am using LC CCS pads on a Flex. Will try my new stuff tomorrow if it doesn't rain. Just got my next order in so this week I have received the Megs 105, Menz Micro Polish, Duragloss 901, Wolfgang DGPS 3.0, Amazing Roll Off, PB Trim Restorer, PB White Diamond, DP MaxWax,
XMT 180, 3M Ultrafina and Forever Black. I want to thank AG for the samples of other stuff to try.

wow good order there!

 

[RaskyR1]

Will it not work with LC ccs pads? If not, what happens, cake on product, grabbing, what??

I'm sure the LC pads are fine. I just like matching a companys designed pad with their polish. I'm also just not a big fan of the CCS pads when using a polish with diminishing abrasives.


Rasky

 

[Rsurfer]

I'm sure the LC pads are fine. I just like matching a companys designed pad with their polish. I'm also just not a big fan of the CCS pads when using a polish with diminishing abrasives.


Rasky

I agree, I'm planning to use a flat LC pad for Ultrafina. Trying to find more 5.5" flat pads not fond of the ccs pads.