6.5" LC Hydro-Tech Cyan Pad

jankerson

jankerson

New member
Joined
Oct 13, 2013
Messages
1,084
Reaction score
0
Used 6.5" Cyan cutting Pad today to do some error correction with the G110 V2.

Worked great with M105 and the G110 V2 had no trouble at all spinning it even under pressure. Left a nice polished finish with M105, no marring at all and it cut very well.

And it held on fine to the Megs backing plate even running it on speed 6. Ran it at 5 and 6.

Looks like they will be a welcome addition to my pad inventory. :xyxthumbs:
 
I've pretty much standardized on the hydro techs. Nice having 3 pads that cover everything.
 
FPEvo said:
I've pretty much standardized on the hydro techs. Nice having 3 pads that cover everything.
Click to expand...

It seemed to work really well, I use the Megs 6.5" pads, the Yellow and Beige usually. Megs doesn't recommend using the Burgundy cutting pad with the DA so I figured I would try the LC Cyan.
 
You must log in or register to reply here.
Back
Top