A few options...

jimbo585

Member
Joined
Jun 9, 2011
Messages
110
Reaction score
0
So I bought a few samples and they came yesterday. Just waiting for a nice day off to use them but want to get opinions on what to use/ order to use them.

Have:
1. Wolfgang swirl remover
2. Wolfgang finishing glaze
3. Wolfgang deep gloss sealant
4. Poorboys black hole

I'm working by hand trying to remove very minor swirls/ water marks. So minor that its very hard to capture in photo or else I would have posted some. But its a black car so everything obviously shows.

I dont want to "cancel out" any products but want the deepest/ flawless finish I can get.

If I were to use all 4 products, I was thinking the order:
1, 4, 2, 3
but would the finishing glaze undo what the poorboys did?

Whats everyone think?

thanks! :xyxthumbs:
 
You already have them listed correctly: 1, 2, 3, 4. I would do each in order, put on and remove. When you get finished with 3, let the vehicle sit overnight and then put on and remove 4.
 
Thanks I guess that makes sense since 1-3 is a process and 4 would just be to enhance gloss and I already have a glaze going on before the sealant. I just didn't know it was okay to top a sealant with a glaze without doing any harm but I will wait overnight to do so!
 
:iagree:
You already have them listed correctly: 1, 2, 3, 4. I would do each in order, put on and remove. When you get finished with 3, let the vehicle sit overnight and then put on and remove 4.

I concur 100% with Parboy's application method. Not to mention you'll be re-upping tour samples to "full" purchases after you see the results. Enjoy.

:buffing:
 
Thanks I guess that makes sense since 1-3 is a process and 4 would just be to enhance gloss and I already have a glaze going on before the sealant. I just didn't know it was okay to top a sealant with a glaze without doing any harm but I will wait overnight to do so!
Wolfgang finishing glaze is not a glaze!! It is actually a polish - very similar to Menzerna 106fa. IMO you apply glaze before sealant. SO, 1,2,4,3 From AG site on PBBH "Use glaze before applying your favorite wax or sealant. "
 
If you are polishing out the swirls there is zero reason to apply the BH glaze.
 
Wolfgang finishing glaze is not a glaze!! It is actually a polish - very similar to Menzerna 106fa. IMO you apply glaze before sealant. SO, 1,2,4,3 From AG site on PBBH "Use glaze before applying your favorite wax or sealant. "

Okay that makes sense because I did read that but didn't know the finishing glaze wasn't really a glaze. I just didn't know what order to use 2 and 4 in. Thanks!
 
Back
Top