A Few Porsches

Anthony Orosco

New member
Joined
Dec 17, 2006
Messages
356
Reaction score
0
First up is a brand spankin new GT3 RS in white, carbon fiber interior trim and alcantara inserts. Incredible car to look at and drive. It sounds very sexy, like an F1 racer, is "sport" mode.

I gave it a No Rinse wash, light polish with Optimum and then sealed with OptiSeal.






WhiteGT3RS.jpg






GT3Tail.jpg






GT3White.jpg






GT3RSInt.jpg






GT3RSTail.jpg






We also have a Lapis Blue Carrera which was a full 5 hour detail. Correction steps were with Optimum Polish, rotary and an LC white pad. Then a blue finishing pad and OP, sealed with Optiseal and then topped with Trade Secret paste wax.





carrerarearOS.jpg






carreraside.jpg






carreratrnk.jpg






carreralapis.jpg






carreraOSTS.jpg






Engine BEFORE:



carreradrtyeng.jpg






Engine AFTER:



carreraeng1.jpg
 
Next I did a 1998 Ocean Jade Metallic Green Carrera with only 6000 miles. Very mild marring so it was lightly polish with OP and then sealed with OptiSeal.






PorscheJadeMetallic.jpg






OSJadeMetallic911.jpg






JadeMetalicrear.jpg






JadeGreenCarrera.jpg







OceanJadeMetallic98.jpg






98JadeMetallicOS.jpg






CloseupJadeflake.jpg






Then I also did again that Signal Green Turbo. Just washed up and vacuumed. This is OptiSeal beading at 8 weeks.





OSbeading52907.jpg






SigGrnSun.jpg






SigGrn94Trbo.jpg






SigGrnTrboOS.jpg
 
A few BEFORE and AFTERS on a white Porsche Carrera.





DrtyEngPnt.jpg










CleanEngPnt.jpg







Wht95DrtyLid.jpg








Wht95Clnlid.jpg







Guards Red Boxster which was corrected with Optimum Polish and a Lake Country white pad and then sealed with OptiSeal and Gliptone paste wax. We did this application by spraying the OptiSeal on the pad, applying to the paint and then some time later applying the wax with the same pad loadsed up with OptiSeal.





OSBxstrS.jpg






GuardsRedBxstrS.jpg






AngleBxstrS.jpg






RedBxstrS.jpg






Silver Turbo, Optimum Polish and OptiSeal





SlvrTrbo.jpg






OptiSealTrbo.jpg






TrboSide.jpg
 
Fantastic work! Porche has always been my dream car.
What did you use on the engine bay of the white Porsche Carrera?
The results are amazing.
 
Thank you guys :)



Black Diamond said:
Fantastic work! Porche has always been my dream car.
What did you use on the engine bay of the white Porsche Carrera?
The results are amazing.


I used Hi-Temp cleaner to clean and dressed it with Optimum Protectant plus. The paint was waxed with PoliSeal.

Thanks again,
Anthony
 
Nice fleet.......do you detail for the dealership or do you own it? I noticed you said "we have". Just curious. Beatiful cars.....love the colors.

What did you use on the tires?

Thanks....
 
Love your work Anthony and the GT3RS except for the suede seats. I must say I don't really care that much for the Opti-Seal look.
 
dengood1 said:
Nice fleet.......do you detail for the dealership or do you own it? I noticed you said "we have". Just curious. Beatiful cars.....love the colors.

What did you use on the tires?

Thanks....

Porsche calls me for a few cars now and then, like the GT3. Many of my clients though have me detail their car after getting it serviced. Most of my clients are Porsche owners, about 85%.

By "we" I mean my good buddy and fellow detailer, Ron.

On the tires I used a combo of Poorboys Bold and Bright and a new beta dressing we are testing from Optimum.

Thank You,
Anthony
 
Anthony Orosco said:
Porsche calls me for a few cars now and then, like the GT3. Many of my clients though have me detail their car after getting it serviced. Most of my clients are Porsche owners, about 85%.

By "we" I mean my good buddy and fellow detailer, Ron.

On the tires I used a combo of Poorboys Bold and Bright and a new beta dressing we are testing from Optimum.

Thank You,
Anthony

Looks like they're on the right track with that dressing;)

Gary, are you sure you don't like the OS look? Just checking:D I have to say, the one's that Anthony added the nuba for the LSP look deeper, and like glass.....things that make you go hmmmm.
 
handsome jpb - very impressive!
i especially LOVE that first white one....and the red one!!!
kudos!
Lauren
 
Gary Sword said:
Love your work Anthony and the GT3RS except for the suede seats. I must say I don't really care that much for the Opti-Seal look.
Gary, these are out door shots, not in a garage like some will post. What don't you like about it?
OSBxstrS.jpg
 
Rsurfer said:
Gary, these are out door shots, not in a garage like some will post. What don't you like about it?
OSBxstrS.jpg
niiiceee
yah gary musta made it big on the dot com boom, probably google...now he sits home on ag buying expensive cars.............
sorry - thread hijacked.
love this red - truls will too!
 
All of them are awesome!! This one stands out to me :)

Nice work !!

SlvrTrbo.jpg
 
Anthony how would you rate the clear coat hardness on a Porsche?


Rsurfer, First of all I know Anthony does a great job polishing. I have seen his work and I know they look excellant before he tops them off with anything. Inside or outside Opti-Seal has IMO a cold kind of shine to it vs the warm glow of a nuba or even some other sealants on the market. I'm not saying it looks bad it's just not the look that I perfer. If you like that look then I would use it. Will all have our own opinions about different products.
 
Rsurfer said:
Gary, these are out door shots, not in a garage like some will post. What don't you like about it?
OSBxstrS.jpg

uh....I HAD to take the pictures in the garage.....it was raining!;)

Remember, this one had a nuba topper.
 
Gary Sword said:
Anthony how would you rate the clear coat hardness on a Porsche?


Rsurfer, First of all I know Anthony does a great job polishing. I have seen his work and I know they look excellant before he tops them off with anything. Inside or outside Opti-Seal has IMO a cold kind of shine to it vs the warm glow of a nuba or even some other sealants on the market. I'm not saying it looks bad it's just not the look that I perfer. If you like that look then I would use it. Will all have our own opinions about different products.
Gary, I respect your opinion. Because of the slickness as stated in my previous post, I will continue to use it. Thanks for your reply.
 
dengood1 said:
uh....I HAD to take the pictures in the garage.....it was raining!;)

Remember, this one had a nuba topper.

Dengood1, that comment about shooting in the garage was not directed at you. You are right about the nuba topping, I forgot.:righton:
 
Back
Top